This section focuses on properties, which the host can either read from the device to retrieve device information (such as its PCI hardware ID, serial number, firmware revision numbers, etc.), or write to the device to change device behavior, or to store values for future reference.
Applies to: DynaFlex II PED
Reference Section
Information Available
Detail on configuring the DynaFlex II PED device.
Configure Wi-Fi connectivity on WLAN-equipped models, including network SSID, security mode, and credentials. Applies only to devices with a WLAN radio.
Continues WLAN configuration with the remaining network properties, such as IP addressing and connection behavior.
Configure the USB interface on USB-connected devices, including communication mode and power behavior during USB suspend. Applies only when connected over USB.
Configure the device's cardholder-facing interface — display behavior, LEDs, buzzer, and prompts — including the UI configuration file.
Continues UI configuration with the remaining interface properties, such as the card-logos page and related on-screen elements.
Set or read the name the device advertises over Bluetooth LE, used to identify the reader when pairing and connecting.
Configure the device's security posture, including SRED/encryption behavior and key status.
Configure the device's system settings
The identifier and version of the China UnionPay contactless kernel firmware.
Firmware and version information for the device's Wi-Fi (WLAN) module, on models equipped with a WLAN radio.
Identifies the custom user-interface package loaded on the device — which custom UI build (if any) is installed, and its version.
Firmware and version information for the device's NFC contactless module and controller.
Reference Section
Information Available
Part A of EMV Terminal ID settings.
Part B of EMV Terminal ID settings.
Part C of EMV Terminal ID settings.
Reference Section
Information Available
The device uses this property to determine what character it should use when sending masked ISO/ABA track data.
The device sends this notification when the battery charge reaches 15 percent.
Reference Section
Information Available
Configure how the device runs financial transactions — EMV terminal and kernel parameters, supported entry methods, and amount, currency, and timeout handling.`
Continues the transaction group with the remaining financial/EMV properties, such as contactless and additional processing options.
Read the device's core identity and status: model name, serial number, firmware and boot versions, real-time clock, and operational state. These are mostly read-only values for identifying and health-checking the reader.
Reference Section
Information Available
The device's top-level firmware identifier — the composite firmware ID that ties together the individual component versions and checksums listed below.
Part number, version, and build details for the device's core application firmware — the main firmware that runs the reader.
Part number and version for the EMV firmware component that handles Level 2 EMV processing for contact and contactless transactions.
Reference Section
Information Available
Read-only hardware information reported by the device, such as model, part number, and hardware revision.
Reference Section
Information Available
This OID contains a 32-bit bitmap. Each bit indicates the status of a transaction key,
The device uses this property to report its security status.
The device uses this property to report its operational status.
Need Help?
For additional support, please contact MagTek Support:
Technical Support:
📧 Email: support@magtek.com
📞 Phone: 1-562-546-6800 (US)
🕐 Hours: Monday-Friday, 5:30 AM - 5:00 PM PST
Online Resources:
🌐 Support Portal: developer.magtek.com
Documentation Feedback:
Help us improve this documentation!