| Property Description | |
| Property OID | 2.3.1.2.1.1 / 0x020301020101 |
| Name | Device Operational Status |
Description | The device uses this property to report its operational status.
Online is the status the manufacturer populates in this property before shipping, and is the result of the device going through processes that configure its security subsystems and features. In this state, the device is fully functional and can perform transactions. Offline means the device is no longer fully functional and can no longer perform transactions. The device automatically transitions to this state if it detects a problem with security or any of the subsystems it checks. For example, trying to open the device triggers a tamper response, which causes the device to change its operational status to Offline. To retrieve more information about the cause of an Offline status, the host can retrieve Property 2.3.1.2.1.2 Offline Status Detail. |
| Securing Key | None |
| Min. Len (b) | 1 |
| Max. Len (b) | 1 |
| Data Type | Binary |
| Valid Values | 0x01 = Offline 0x02 = Online |
| Default | None |
| Example (Hex) |
| AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C100 |
| Example (Hex) |
| AA00 81048255D101 820400000000 84820010 D101 850102 870403010201 8903 C101 02 |
| Property Description | |
| Property OID | 2.3.1.2.1.2 / 0x020301020102 |
| Name | Offline Status Detail |
Description | The device uses this property to report the status of every subsystem that can cause the device’s operation status to be set to Offline in Property 2.3.1.2.1.1 Device Operational Status.
The property consists of a sequence of bytes where each bit in each byte represents the status of a subsystem. If a bit is set to one, then there is a problem with the subsystem, otherwise no problem was detected. Some subsystems provide other properties or commands that can be used to get more information about the subsystem’s status. For example, Property 2.3.1.1.2.2 Tamper Sensors Activated and Property 2.3.1.1.2.3 Tamper Sensor Tampered. |
| Securing Key | None |
| Min. Len (b) | 1 |
| Max. Len (b) | 16 (reserved for future expansion) |
| Data Type | Binary |
Valid Values | Byte 0 · Bit 0 = Tamper problem present · Bit 1 = Master Key problem present · Bit 2 = Keys and Certificates problem present · Bit 3 = Real Time Clock problem present · Bit 4 = Random Number Generator problem present · Bit 5 = Cryptography Engine problem present · Bit 6 = Magnetic Stripe Reader Hardware problem present · Bit 7 = Reserved |
| Default | None |
| Example (Hex) |
| AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C200 |
| Example (Hex) |
| AA00 81048255D101 820400000000 84820010 D101 850102 870403010201 8903 C201 00 |
| Property Description | |
| Property OID | 2.3.1.2.1.3 / 0x020301020103 |
| Name | External Power Supplied |
| Description | The device uses this property to report the status of external power. |
| Securing Key | None |
| Min. Len (b) | 1 |
| Max. Len (b) | 1 |
| Data Type | Binary |
| Valid Values | 0x00 = No external power supplied 0x01 = Power supplied by USB port |
| Default | None |
| Example (Hex) |
| AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C300 |
| Example (Hex) |
| AA00 81048255D101 820400000000 84820010 D101 850102 870403010201 8903 C301 01 |
| Property Description | |
| Property OID | 2.3.1.2.1.4 / 0x020301020104 |
| Name | Battery State of Charge |
| Description | The device uses this property to report the charge status of the internal battery. The charge status is reported as a percentage of full charge. |
| Securing Key | None |
| Min. Len (b) | 1 |
| Max. Len (b) | 1 |
| Data Type | Binary |
| Valid Values | 0x00..0x64 |
| Default | None |
| Example (Hex) |
| AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C400 |
| Example (Hex) |
| AA00 81048255D101 820400000000 84820010 D101 850102 870403010201 8903 C401 64 |
| Property Description | |
| Property OID | 2.3.1.2.1.5 / 0x020301020105 |
| Name | Battery Charger Status |
| Description | The device uses this property to report the status of the battery charger. |
| Securing Key | None |
| Min. Len (b) | 1 |
| Max. Len (b) | 1 |
| Data Type | Binary |
Valid Values | 0x00 = Precharge 0x01 = Fast charge – constant current 0x02 = Fast charge – constant voltage 0x03 = End of charge 0x04 = Charge complete 0x08 = No external power supplied |
| Default | None |
| Example (Hex) |
| AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C500 |
| Example (Hex) |
| AA00 81048255D101 820400000000 84820010 D101 850102 870403010201 8903 C501 04 |
| Property Description | |
| Property OID | 2.3.1.2.1.6 / 0x020301020106 |
| Name | Device Temperature |
| Description | The device uses this property to report the temperature in Celsius |
| Securing Key | None |
| Min. Len (b) | 1 |
| Max. Len (b) | 1 |
| Data Type | Signed Binary |
| Valid Values | 0x80 .. 0x7F (-128 .. 127) |
| Default | None |
| Example (Hex) |
| AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C600 |
| Example (Hex) |
| AA00 81048255D101 820400000000 84820010 D101 850102 870403010201 8903 C601 26 |
| Property Description | |
| Property OID | 2.3.1.2.1.7 / 0x020301020107 |
| Name | Device Time |
| Description | The device uses this property to report the device RTC time. It returns the time in 24 hour clock format HH:MM:SS. |
| Securing Key | None |
| Min. Len (b) | 3 |
| Max. Len (b) | 3 |
| Data Type | Unsigned Binary |
| Valid Values | HH (0x00 – 0x17) MM (0x00 – 0x3B) SS(0x00 – 3B) |
| Default | None |
| Example (Hex) |
| AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C700 |
| Example (Hex) |
| AA0081048255D10182040000000084820012D1018501028704030102018905C703040909 |