System Status Security Protection Information - Property Subgroup 2.3.1.1.2.n

Table SSSP-1 - Real Time Clock Enabled - Property 2.3.1.1.2.1

Property Description
Property OID	2.3.1.1.2.1 / 0x020301010201
Name	Real Time Clock Enabled
Description	The device maps this property to its internal register that enables its internal real-time clock. Because the device ensures that register is enabled every time it powers up, this property should always report Real Time Clock Enabled.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = Real Time Clock Not Enabled 0x01 = Real Time Clock Enabled
Default	None

Table SSSP-2 - Real Time Clock Enabled - Get Request Example

Example (Hex)
AA00 8104 0155D101 840F D101 8501 02 8704 03010102 8902 C100

Table SSSP-3 - Real Time Clock Enabled - Get Response Example

Example (Hex)
AA00 81048255D101 820400000000 84820010 D101 850102 870403010102 8903 C101 01

Table SSSP-4 - Tamper Sensors Activated - Property 2.3.1.1.2.2

Property Description
Property OID	2.3.1.1.2.2 / 0x020301010202
Name	Tamper Sensors Activated
Description	The device uses this property to report whether its tamper sensors have been activated using Command 0xF016 - Activate Device Security (MAGTEK INTERNAL ONLY). A device that is operating normally should always have its tamper sensors activated.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = Tamper Sensors Not Activated 0x01 = Tamper Sensors Activated
Default	None

Table SSSP-5 - Tamper Sensors Activated - Get Request Example

Example (Hex)
AA00 8104 0155D101 840F D101 8501 02 8704 03010102 8902 C100

Table SSSP-6 - Tamper Sensors Activated - Get Response Example

Example (Hex)
AA00 81048255D101 820400000000 84820010 D101 850102 870403010102 8903 C101 01

Table SSSP-7 - Tamper Sensor Tampered - Property 2.3.1.1.2.3

Property Description
Property OID	2.3.1.1.2.3 / 0x020301010203
Name	Tamper Sensor Tampered
Description	The device uses this property to report whether a tamper sensor has tampered. A device that is operating normally should not reported that it has been tampered with. To examine the device’s tamper history to determine the cause, use Command 0xF014 - Read Log (MAGTEK INTERNAL ONLY) or Command 0xF015 - Read Log & Clear Tamper (MAGTEK INTERNAL ONLY).
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = Not Tampered 0x01 = Tampered
Default	None

Table SSSP-8 - Tamper Sensor Tampered - Get Request Example

Example (Hex)
AA00 8104 0155D101 840F D101 8501 02 8704 03010102 8902 C300

Table SSSP-9 - Tamper Sensor Tampered - Get Response Example

Example (Hex)
AA00 81048255D101 820400000000 84820010 D101 850102 870403010102 8903 C301 00