Working with contactless cards and tags on the DynaFlex II PED, the supported card technologies (NTag, MIFARE Ultralight, Classic, DESFire, Plus), how pass-through works, and NFC card emulation (DynaCast). This is shared DynaFamily content, documented once in the guide.
Reference Section
Information Available
Send commands to and receive responses from an NTag or MIFARE Ultralight (Type 2) tag.
After the tag is activated, send commands to and receive responses from a MIFARE Classic, MINI, or Plus SL1 (Type 2) tag.
Send commands to and receive responses from a MIFARE DESFire (Type 4) tag.
Send commands to and receive responses from a MIFARE Plus (Type 2) tag.
Exchange raw ISO 14443-4 APDUs with any card that supports the protocol.
Enter or leave contactless pass-through mode.
Start or stop the reader polling for a contactless card.
The device will prepare card emulation with the parameters provided in the command and start card emulation.
Need Help?
For additional support, please contact MagTek Support:
Technical Support:
📧 Email: support@magtek.com
📞 Phone: 1-562-546-6800 (US)
🕐 Hours: Monday-Friday, 5:30 AM - 5:00 PM PST
Online Resources:
🌐 Support Portal: developer.magtek.com
Documentation Feedback:
Help us improve this documentation!