Pass Through Command for MIFARE DESFire, Type 4 - Command 0x1102

After a MIFARE DESFire Light/EV1/EV2/EV3 Tag is activated, the host uses this command to send commands and receive responses to and from a MIFARE DESFire Tag.

There will be a fixed 30 second timeout for commands that require multiple command/responses.

Timeout: 30 seconds for commands that require multiple command/responses.

Request Data for Pass Through Command for MIFARE DESFire, Type 4 - Command 0x1102

Tag	Len	Value / Description	Typ	Req	Default
Beginning of any wrappers, at minimum including Request Message
1102		Pass Through Command for MIFARE DESFire, Type 4 - Command 0x1102
81	var	Command to Send. See DESFire Data Sheet (MF2DLHX0). Should follow ISO 7816-4 APDU format: C-APDU CLA INS P1 P2 Lc Data Le	B	R
82	01	00 – No Encrypt 01 - Encrypt
83	01	00 – Expect More Commands 01 – FF (Last Command). If last command, Device will provide a single beep after receiving a successful response from tag; otherwise, device will provide a double beep.	B	R
End of any wrappers, at minimum including Request Message

Response Data for Command Pass Through Command for MIFARE DESFire, Type 4 - 0x1102

Tag	Len	Value / Description	Typ	Req	Default
Beginning of any wrappers, at minimum including Response Message
1102		Pass Through Command for MIFARE DESFire, Type 4 - Command 0x1102
81	02	Tag Response (SW1 SW2). See DESFire Data Sheet (MF2DLHX0). Should follow ISO 7816-4 APDU format: SW1 and SW2 of R-APDU If card is not able to respond: SW1 = 0x64, SW2 = 0x00	B	R	N/A
82	var	Tag Data: Data of R-APDU Encryption Control: If encrypted, see Table XXX- Payload for Encrypted NFC/MIFARE Data. If unencrypted, see Table XXX– Unencrypted NFC/MIFARE Data.	B	O	N/A
End of any wrappers, at minimum including Response Message

If the request started successfully, the Request Status in the message wrapper is: OK, Started / Running, All good / requested operation was successful.

Request Example (Get Version Part 1)

Example (Hex)

AA 00 81 04 01 13 11 02 84 0F 11 02 81 05 90 60 00 00 00 82 01 00 83 01 00

Response Example (Get Version Part 1)

Example (Hex)

AA 00 81 04 82 13 11 02 82 04 01 00 00 00 84 14 11 02 81 02 91 AF 82 0C FC 0A DF 7A 07 04 08 01
30 00 13 05

Encrypted Data Format

Payload for Encrypted NFC/MIFARE Data

Tag	Len	Value / Description	Typ	Req	Default
/DFDF59	var	Encrypted Data Primitive. Decrypt the value of this TLV data object using the algorithm and variant specified in the Encrypted Data KSN parameter and the Encrypted Data Encryption Type parameter to read its contents. The format of the decrypted data is shown in Table XXX.	B	R
/DFDF50	var	Encrypted Data KSN	B	R
/DFDF51	01	Encrypted Data Encryption Type. See Encryption Type for a list of valid values.	B	R
End of Notification Message

Unencrypted NFC/MIFARE Data

Tag	Len	Value / Description	Typ	Req	Default
FC	var	NFC/MIFARE Data Container	T	R
/DF7A	var	NFC/MIFARE Data	B	O