ISO 14443-4 APDU Pass-Through Commands - Command 0x3003
Last updated
⌘Ctrlk
After the NFC Type A or Type B card is activated, the host uses this command to send application-level APDUs to a PICC that supports ISO 14443-4 Protocol. The device sends the PICC response back to the host.
Tag
Len
Value / Description
Typ
Req
Default
Beginning of any wrappers, at minimum including Request Message
3003 = ISO 14443-4 APDU Pass-Through Commands - Command 0x3003 –
81
var
Command to Send.
Should follow ISO 7816-4 APDU format
C-APDU
CLA INS P1 P2 Lc Data Le
R
End of any wrappers, at minimum including Request Message
Tag
Len
Value / Description
Typ
Req
Default
Beginning of any wrappers, at minimum including Request Message
3003 = APDU Pass-Through Commands - Command 0x3003
81
02
Tag Response (SW1 SW2)
Should follow ISO 7816-4 APDU format
· SW1 and SW2 of R-APDU
If card is not able to respond:
SW1 = 0x64, SW2 = 0x00
B
R
N/A
82
Var
Tag Data
· Data of R-APDU
B
O
N/A
End of any wrappers, at minimum including Request Message
Example (Hex)
Last updated
AA 00 81 04 01 A1 30 03 84 09 30 03 81 05 90 60 00 00 00AA 00 81 04 82 A1 30 03 82 04 01 00 00 00 84 14 30 03 81 02 91 AF 82 0C FC 0A DF
7A 07 04 01 01 33 00 18 05