Open your browser and navigate to the URL below.

• https://www.magtek.com/Content/SoftwarePackages/1000008207.zip

• Download the zip file and extract its contents to an accessible folder on a Windows computer

• Double-click the setup.exe

Click the Install button.

After the installation is complete, launch Reader Configuration Gen II.

The MagTek Reader Configuration Gen II Program is an application designed to leverage the MagTek RS3 web services, for secure key injection and device configuration of DynaFlex family devices.

By running the MagTek Reader Configuration Gen II Program, the user can configure their device and load keys in a secure environment.

Windows System Requirements:

• Windows 10 Operating System or newer

• USB Port

***Not All Configuration Options are available to all SCRAs

Configuration Options available are determined—

• By the type of device being used

• By the Configuration Options provided by MagTek

***Key Loading via a Bluetooth wireless interface is not supported. This affects any wireless MagneSafe reader. Key injection for wireless readers must be done via USB using the MagTek Reader Configuration Gen II Program.

***Certain COMMANDS require a reset of the device

• Please see the individual device’s Programmer’s Manual for affected Commands

The Reader Management System (RMS) is MagTek's cloud service for remotely managing deployed card readers. From a single console — or through the RMS API — you can monitor device status and health, push configuration and key updates, and keep firmware current across an entire fleet, without handling each device in person. RMS is how you operate MagTek readers in the field at scale, after they're deployed.

What you can do with RMS

• Monitor your fleet — device status, health, and inventory across all your deployed readers.

• Manage configuration — push settings and configuration to devices remotely.

• Rotate keys and update firmware — keep devices current and compliant without physical access.

• Automate with the API — integrate RMS into your own systems through its REST API.

Manual Part Number: D9982000480-10

REGISTERED TO ISO 9001:2015

Copyright © 2006 - 2021 MagTek, Inc.

Information in this publication is subject to change without notice and may contain technical inaccuracies or graphical discrepancies. Changes or improvements made to this product will be updated in the next publication release. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc.

MagTek® is a registered trademark of MagTek, Inc. MagnePrint® is a registered trademark of MagTek, Inc. Magensa™ is a trademark of MagTek, Inc.

MagneSafe® is a trademark of MagTek, Inc.

Microsoft® and Windows® are registered trademarks of Microsoft Corporation.

All other system names and product names are the property of their respective owners.

The information contained herein is confidential and proprietary to: MagTek, Inc.

1710 Apollo Court Seal Beach, CA 90740 562-546-6400

The purpose of this document is to provide a description of how to use the MagTek Reader Configuration Gen II Program for Remote Configuration and Key Injection for MagneSafe devices. This application is provided to MagTek Customers. Certain functions are No Charge and other functions are billable events. Please refer to the executed Remote Services Agreement and Pricing Schedule A.

Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc.

• DES - Data Encryption Standard

• DUKPT – Derived Unique Key per Transaction

• KSN – Key Serial Number

The Device Information window will appear in the upper right corner of the application. It provides the following information about the attached DynaFlex device:

• MagTek Protocol

• Connection Type

• Device Model

• Serial Number

• Firmware

• Device and Serial Number

• Device List displays a list of attached devices. please select the target device and proceed. The Rescan button updates the list of Target Devices visible to the MagTek Reader Configuration Gen II Program.

• Open Device will open the reader.

• Close Device will close the reader.

The Key Configuration tab can be used to change a device’s key(s). It shows the Key(s) currently Loaded. DynaFlex family devices can have several types of keys injected or loaded. There is also a drop-down list of Key to Update. This drop-down list will show the KSID.

To perform an Update Key, click on the Keys Loaded drop down list, and select the desired key slot.

Click the Available Key to Update drop down list and choose the desired KSN.

Click the Update Key button to inject the designated KSID into the designated key slot.

The following message will appear Updating Key, Please Wait.

The following message will appear after the Key is successfully injected.

EMV Configuration allows the user to Load EMV tags (terminal and application settings) and CAPKs (certificate authority public keys). The file format is *.xlsx. Please contact MagTek for assistance with the desired information.

Click the Browse button to locate the desired *.xlsx file.

Once the file is selected, click the Update button to load the selected *.xlsx file.

Device Configuration allows the user to Load Firmware and load image files.

Click the Browse button to locate the desired *.bin file.

Once the file is selected, click the Update button to load the selected *.bin file. Please note, this application will not load an older version of firmware than what is currently loaded, and it will also not overwrite the same version currently loaded. This tool can only be used to update to a newer revision of firmware. If you need assistance with older revisions, please contact your MagTek representative.

Load Images allows the user to import as many as 4 custom images that can be displayed on DynaFlex Pro. The file format must be *.bmp and the file size must be 320 x 240 for Landscape and 240 x 320 for Portrait. Image Slot 0 is reserved for the default Welcome Screen and cannot be changed. Image Slots 1 – 4 are available to the user.

Click the Browse button to locate the desired *.bmp file.

Once the file is selected, click the Load Image button to load the selected *.bmp file in the Slot chosen.

A message will display indicating the Image is being sent to the DynaFlex Pro. If successful, the following message will display.

Next, press the drop down for “Select active image slot” and press the Set Image button.

Press the Yes button to complete the process and rest DynaFlex Pro. After the reset, the selected image will display on screen.

• The Login box will appear.

• Enter your User Name, Password and Customer Code provided to you by MagTek.

• Checking the Save Login Credential will cache the user’s credentials to streamline future login.

• Press LogIn.

For certain “no charge” configuration related functions, the Public Account can be used by pressing the “Use Public Account” button.

• API – Application Programming Interface

• EMV –Europay, MasterCard® and Visa®

• KSN - Key Serial Number

• MUT - MagTek Update Token

• SDK – Software Developer’s Kit

• SN - Serial Number

• UIK - Unique Identifier Key

• Force update – Supplying Version:0 in the web API call. Otherwise RMS determines of update.

Configuration Update

This document provides instructions to use the RMS Sample Code. Combining MagTek Linux SDK and web API calls to the Reader Management System (RMS) web service, the sample code assist in setting configurations, key injection, updating EMV Tags/CAPKs, and updating firmware for MagTek readers. The sample code is parsed into a collection of CLI apps (command line interface).

• Configuration app

• EMV Tags app

Configuration Update

• Go to the folder: rms_scra and open a terminal.

• Connect the reader to a USB port.

• Enter command below. Enter password if prompted. This is for device port access.

$ sudo ./rms_scra_config_update

• A list of available configurations is returned. List depends on the firmware ID and RMS Profile. Example:

• At the prompt, select a configuration by entering its number listed to its left. A sequence of commands are downloaded from RMS and sent to the reader. Status of the configuration is shown as updated or failed and the end of the sequence.

• Whenever a configuration reports is up to date, it may be redone by entering *N, where N is the configuration. Example: *1

• Go to the folder: rms_scra and open a terminal.

• Connect the reader to a USB port.

• Enter command below. Enter password if prompted. This is for device port access.

• The sample code downloads the sequence of commands to update the EMV Tags and CAPKs available for the reader. Example:

• Whenever a configuration result is: Configuration is up to date it may be redone by adding -f to force the update.

• Go to the folder: rms_scra and open a terminal.

• Connect the reader to a USB port.

• Enter command below. Enter password if prompted. This is for device port access.

• The parameters for the firmware update is as follows.

• Example for updating MAIN firmware.

• A sequence of commands are downloaded from RMS and sent to the reader. Status of the update is shown as finished or failed and the end of the sequence.

• Whenever a firmware result is: Firmware is up to date. It may be redone by adding -f to force the update.

Linux Sample Code Manual

Manual Part Number: D998200733-100

REGISTERED TO ISO 9001:2015

Information in this publication is subject to change without notice and may contain technical inaccuracies or graphical discrepancies. Changes or improvements made to this product will be updated in the next publication release. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc.

MagTek® is a registered trademark of MagTek, Inc. MagneSafe® is a registered trademark of MagTek, Inc. iDynamo™, and uDynamo are trademarks of MagTek, Inc.

eDynamo™, Dynamag, and DynaMAX are trademarks of MagTek, Inc.

DynaProx™, DynaFlex Pro™, and DynaFlex II PED™ are trademarks of MagTek, Inc.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MagTek is under license.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. Ubuntu® is a registered trademark of Canonical Ltd.

Microsoft®, Windows® and .NET® are registered trademarks of Microsoft Corporation.

EMV® is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four graduating arcs, is a trademark owned by and used with permission of EMVCo, LLC.

All other system names and product names are the property of their respective owners.

IMPORTANT: YOU SHOULD CAREFULLY READ ALL THE TERMS, CONDITIONS AND RESTRICTIONS OF THIS LICENSE AGREEMENT BEFORE INSTALLING THE SOFTWARE PACKAGE. YOUR INSTALLATION OF THE SOFTWARE PACKAGE PRESUMES YOUR ACCEPTANCE OF THE TERMS, CONDITIONS, AND RESTRICTIONS CONTAINED IN THIS AGREEMENT. IF YOU DO NOT AGREE WITH THESE TERMS, CONDITIONS, AND RESTRICTIONS, PROMPTLY RETURN THE SOFTWARE PACKAGE AND ASSOCIATED DOCUMENTATION TO THE ADDRESS ON THE FRONT PAGE OF THIS DOCUMENT, ATTENTION: CUSTOMER SUPPORT.

MagTek, Incorporated (the "Licensor") owns and has the right to distribute the described software and documentation, collectively referred to as the "Software."

LICENSE: Licensor grants you (the "Licensee") the right to use the Software in conjunction with MagTek products. LICENSEE MAY NOT COPY, MODIFY, OR TRANSFER THE SOFTWARE IN WHOLE OR IN PART EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT. Licensee may not decompile, disassemble, or in any other manner attempt to reverse engineer the Software. Licensee shall not tamper with, bypass, or alter any security features of the software or attempt to do so.

TRANSFER: Licensee may not transfer the Software or license to the Software to another party without the prior written authorization of the Licensor. If Licensee transfers the Software without authorization, all rights granted under this Agreement are automatically terminated.

COPYRIGHT: The Software is copyrighted. Licensee may not copy the Software except for archival purposes or to load for execution purposes. All other copies of the Software are in violation of this Agreement.

TERM: This Agreement is in effect as long as Licensee continues the use of the Software. The Licensor also reserves the right to terminate this Agreement if Licensee fails to comply with any of the terms, conditions, or restrictions contained herein. Should Licensor terminate this Agreement due to Licensee's failure to comply, Licensee agrees to return the Software to Licensor. Receipt of returned Software by the Licensor shall mark the termination.

LIMITED WARRANTY: Licensor warrants to the Licensee that the disk(s) or other media on which the Software is recorded are free from defects in material or workmanship under normal use.

THE SOFTWARE IS PROVIDED AS IS. LICENSOR MAKES NO OTHER WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Because of the diversity of conditions and PC hardware under which the Software may be used, Licensor does not warrant that the Software will meet Licensee specifications or that the operation of the Software will be uninterrupted or free of errors.

IN NO EVENT WILL LICENSOR BE LIABLE FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY TO USE, THE SOFTWARE. Licensee's sole remedy in the event of a defect in material or workmanship is expressly limited to replacement of the Software disk(s) if applicable.

GOVERNING LAW: If any provision of this Agreement is found to be unlawful, void, or unenforceable, that provision shall be removed from consideration under this Agreement and will not affect the enforceability of any of the remaining provisions. This Agreement shall be governed by the laws of the State of California and shall inure to the benefit of MagTek, Incorporated, its successors or assigns.

ACKNOWLEDGMENT: LICENSEE ACKNOWLEDGES THAT HE HAS READ THIS AGREEMENT, UNDERSTANDS ALL OF ITS TERMS, CONDITIONS, AND RESTRICTIONS, AND AGREES TO BE BOUND BY THEM. LICENSEE ALSO AGREES THAT THIS AGREEMENT SUPERSEDES ANY AND ALL VERBAL AND WRITTEN COMMUNICATIONS BETWEEN LICENSOR AND LICENSEE OR THEIR ASSIGNS RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT.

QUESTIONS REGARDING THIS AGREEMENT SHOULD BE ADDRESSED IN WRITING TO MAGTEK, INCORPORATED, ATTENTION: CUSTOMER SUPPORT, AT THE ADDRESS LISTED IN THIS DOCUMENT, OR E-MAILED TO .

DEMO SOFTWARE / SAMPLE CODE: Unless otherwise stated, all demo software and sample code are to be used by Licensee for demonstration purposes only and MAY NOT BE incorporated into any production or live environment. The PIN Pad sample implementation is for software PIN Pad test purposes only and is not PCI compliant. To meet PCI compliance in production or live environments, a third-party PCI compliant component (hardware or software-based) must be used.