Manual Part Number: D9982000480-10
REGISTERED TO ISO 9001:2015
Copyright © 2006 - 2021 MagTek, Inc.
Information in this publication is subject to change without notice and may contain technical inaccuracies or graphical discrepancies. Changes or improvements made to this product will be updated in the next publication release. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc.
MagTek® is a registered trademark of MagTek, Inc. MagnePrint® is a registered trademark of MagTek, Inc. Magensa™ is a trademark of MagTek, Inc.
MagneSafe® is a trademark of MagTek, Inc.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
All other system names and product names are the property of their respective owners.
The information contained herein is confidential and proprietary to: MagTek, Inc.
1710 Apollo Court Seal Beach, CA 90740 562-546-6400
The purpose of this document is to provide a description of how to use the MagTek Reader Configuration Gen II Program for Remote Configuration and Key Injection for MagneSafe devices. This application is provided to MagTek Customers. Certain functions are No Charge and other functions are billable events. Please refer to the executed Remote Services Agreement and Pricing Schedule A.
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc.
The MagTek Reader Configuration Gen II Program is an application designed to leverage the MagTek RS3 web services, for secure key injection and device configuration of DynaFlex family devices.
By running the MagTek Reader Configuration Gen II Program, the user can configure their device and load keys in a secure environment.
Windows System Requirements:
Windows 10 Operating System or newer
USB Port
***Not All Configuration Options are available to all SCRAs
Configuration Options available are determined—
By the type of device being used
By the Configuration Options provided by MagTek
***Key Loading via a Bluetooth wireless interface is not supported. This affects any wireless MagneSafe reader. Key injection for wireless readers must be done via USB using the MagTek Reader Configuration Gen II Program.
***Certain COMMANDS require a reset of the device
Please see the individual device’s Programmer’s Manual for affected Commands
10
May 2021
Initial Release
DES - Data Encryption Standard
DUKPT – Derived Unique Key per Transaction
KSN – Key Serial Number
PCI DSS – Payment Card Industry Date Security Standard
SCRA – Secure Card Reader Authenticator
Security Level – MagneSafe level of security
Triple DES/3DES – Triple Data Encryption Standard
CAPK – Certification Authority Public Key
LMB – Locked Magensa Bundle
MPK/MPK2 – Magensa Production Keys, KSID 9070020 and 90700500
The Device Information window will appear in the upper right corner of the application. It provides the following information about the attached DynaFlex device:
MagTek Protocol
Connection Type
Device Model
Serial Number
Firmware
Device and Serial Number
Device List displays a list of attached devices. please select the target device and proceed. The Rescan button updates the list of Target Devices visible to the MagTek Reader Configuration Gen II Program.
Open Device will open the reader.
Close Device will close the reader.
The Key Configuration tab can be used to change a device’s key(s). It shows the Key(s) currently Loaded. DynaFlex family devices can have several types of keys injected or loaded. There is also a drop-down list of Key to Update. This drop-down list will show the KSID.
To perform an Update Key, click on the Keys Loaded drop down list, and select the desired key slot.
Click the Available Key to Update drop down list and choose the desired KSN.
Click the Update Key button to inject the designated KSID into the designated key slot.
The following message will appear Updating Key, Please Wait.
The following message will appear after the Key is successfully injected.
EMV Configuration allows the user to Load EMV tags (terminal and application settings) and CAPKs (certificate authority public keys). The file format is *.xlsx. Please contact MagTek for assistance with the desired information.
Click the Browse button to locate the desired *.xlsx file.
Once the file is selected, click the Update button to load the selected *.xlsx file.
Device Configuration allows the user to Load Firmware and load image files.
Click the Browse button to locate the desired *.bin file.
Once the file is selected, click the Update button to load the selected *.bin file. Please note, this application will not load an older version of firmware than what is currently loaded, and it will also not overwrite the same version currently loaded. This tool can only be used to update to a newer revision of firmware. If you need assistance with older revisions, please contact your MagTek representative.
Load Images allows the user to import as many as 4 custom images that can be displayed on DynaFlex Pro. The file format must be *.bmp and the file size must be 320 x 240 for Landscape and 240 x 320 for Portrait. Image Slot 0 is reserved for the default Welcome Screen and cannot be changed. Image Slots 1 – 4 are available to the user.
Click the Browse button to locate the desired *.bmp file.
Once the file is selected, click the Load Image button to load the selected *.bmp file in the Slot chosen.
A message will display indicating the Image is being sent to the DynaFlex Pro. If successful, the following message will display.
Next, press the drop down for “Select active image slot” and press the Set Image button.
Press the Yes button to complete the process and rest DynaFlex Pro. After the reset, the selected image will display on screen.
The Login box will appear.
Enter your User Name, Password and Customer Code provided to you by MagTek.
Checking the Save Login Credential will cache the user’s credentials to streamline future login.
Press LogIn.
For certain “no charge” configuration related functions, the Public Account can be used by pressing the “Use Public Account” button.
Open your browser and navigate to the URL below.
Download the zip file and extract its contents to an accessible folder on a Windows computer
Double-click the setup.exe
Click the Install button.
After the installation is complete, launch Reader Configuration Gen II.