> For the complete documentation index, see [llms.txt](https://developer.magtek.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://developer.magtek.com/services/~/revisions/hh8XuzI4i4H7MDrPcZQI/reader-management-system/documentation/ios-installation-and-operation-manual/installation-and-user-interface.md).

# Installation and User Interface

## Installation

Begin by downloading the [<mark style="color:red;">**MagTek Reader Management System**</mark>](https://developer.magtek.com/services/~/revisions/bcRqw3Z8lYFnYS623f0c/reader-management-system/rms-apps-and-software-downloads).

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2FHIfhk2BsK6AQQQASag7l%2Fimage.png?alt=media&amp;token=948d453a-ba8f-4cc5-819d-d1c0b077443f" alt=""><figcaption></figcaption></figure>

Open the MagTek Reader Management System iOS app.

## Tabs <a href="#id-3.2_tabs" id="id-3.2_tabs"></a>

The main User Interface consists of five tabs located at the bottom of the page. These tabs are labeled as follows:

* Connect
* Device
* Configs
* Commands
* About

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2F6bOBOfpZvHpSyQb31T8r%2Fimage.png?alt=media&amp;token=3fe2a4fa-2fe7-487e-bbc3-4672c21a2390" alt=""><figcaption></figcaption></figure>

The Active Tab icon will be highlighted red as illustrated above.

### Connect

The Connect Tab will connect a device to the RMS app. The upper portion of the tab contains:

* **API Key:** This field is automatically populated when a device is connected, the characters are masked for security reasons. Although the field is editable, it is not recommended to alter the API Key field.
* **Profile Name:** The Profile Name will be provided during onboarding.
* **Device Type:** There are two device type options, DynaFlex/DynaProx and MagneSafe.
* **Interface Type:** There are three interface types, Lightning/USB-C , Bluetooth LE , and for WLAN enabled devices.

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2FAqdGpEZ536sdn2NlnpmX%2Fimage.png?alt=media&amp;token=dc4633a2-9c1e-4722-a30f-060a148cb4b8" alt=""><figcaption></figcaption></figure>

The lower portion of the Connect Tab contains:

* **Select Reader Refresh:** When connecting Bluetooth enabled devices, this button will refresh the list of available devices to connect to.
* **Device Name:** Tap on the Device Name to connect.
* **No Reader Connected:** This button becomes Disconnect after tapping on the device name to connect.
* **Main UI Tab Bar:** The main tabs for the RMS app are located at the bottom of the screen. The active tab is highlighted red.

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2FJ6cLEvzOPam6Y2zj2gqa%2Fimage.png?alt=media&amp;token=f94c3af4-bbe9-4aad-8952-1fce1ce9860e" alt=""><figcaption></figcaption></figure>

## Device <a href="#id-3.2.2_device" id="id-3.2.2_device"></a>

With a device paired and connected, The Device Tab will update devce Firmware and EMV tags/CAPKS.

* **Log:** The Device Tab contains a log of all events.
* **Clear Log:** The Clear Log button will remove all log data until a new instance is provided by the reader.
* **Force Update:** This option will update Firmware and EMV Tags/CAPKS when checked.
* **Check Boxes:** The Device Tab contains pre-selected options to update Firmware and EMV Tags/CAPKS. The user can uncheck either option if needed.&#x20;
* **Update:** The Update button loads the updates checked.

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2Fo2GuffcwBXVLWFsQs7rv%2Fimage.png?alt=media&amp;token=afe07219-e01d-4291-97bc-6fce8a108a21" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
**Note**: The EMV Tags/CAPKS update are not available for iDynamo 5 Gen III as it is an MSR only device.
{% endhint %}

## Configs <a href="#id-3.2.3_configs" id="id-3.2.3_configs"></a>

The Configs Tab will update the device’s configurations.

* **Log:** The Configs Tab contains a log of all events.
* **Clear Log:** The Clear Log button will remove all log data until a new instance is provided by the reader. The Refresh  button will refresh the list of available configurations for the device connected.
* **Force Update:** This option will update configs when checked.
* **Config List:** Tap on the desired configuration to select.&#x20;
* **Update:** Press the Update button to load the selected config.

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2FFzDBARMmtM0C9aT10HYM%2Fimage.png?alt=media&amp;token=42591513-b293-4664-84fe-df2e85f3bff6" alt=""><figcaption></figcaption></figure>

## Commands <a href="#id-3.2.4_commands" id="id-3.2.4_commands"></a>

The Commands Tab allows users to send commands to a device. Responses are recorded in the Log.&#x20;

* **Log:** The Commands Tab contains a log that will display the details of all commands entered and responses returned.
* **Clear Log:** The Clear Log button will remove all log data until a new instance is provided by the reader.
* **Commands Field:** This field allows the user to enter commands.
* **Send:** This button sends commands to the reader.

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2F5l3GK8CHEPsRm5m2BhGw%2Fimage.png?alt=media&amp;token=dea40bf5-ef55-450b-a772-3d918835229f" alt=""><figcaption></figcaption></figure>

### About <a href="#id-3.2.5_about" id="id-3.2.5_about"></a>

The About Tab will display the App PN number, current version, and a link to FAQs available at MagTek.com.

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2FBYDQdtss5anNq6c1cg7y%2Fimage.png?alt=media&amp;token=784da897-11e7-40ed-93ef-74ce069013a5" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://developer.magtek.com/services/~/revisions/hh8XuzI4i4H7MDrPcZQI/reader-management-system/documentation/ios-installation-and-operation-manual/installation-and-user-interface.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
