> For the complete documentation index, see [llms.txt](https://developer.magtek.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://developer.magtek.com/services/reader-management-system/documentation/selectable-card-data-encryption-onboarding-ios.md).

# Selectable Card Data Encryption Onboarding (iOS)

This document is intended to describe onboarding for Selectable Card Data Encryption (SCDE) available on DynaFlex II GO devices. This feature is intended to allow the user to view card data outside of a transaction scenario. It is accessible using the MagTek Reader Management System (RMS) Application available in the Apple App Store.

{% hint style="info" %}
**Applicable to:** The feature will work only with the DynaFlex II Go RMS iOS app compatible with iPhone, iPad, and iPod touch, iPad OS.
{% endhint %}

## RMS iOS Application <a href="#rms_ios_application" id="rms_ios_application"></a>

* iOS Application&#x20;
* Compatible with Bluetooth Low Energy (BLE) connected readers, as well as WLAN enabled readers.

{% hint style="warning" %}
**Note:** SCDE is supported for MagTek DynaFlex II GO devices only.
{% endhint %}

## User Instructions <a href="#id-2_user_instructions" id="id-2_user_instructions"></a>

The user must load the most current DynaFlex II GO firmware before beginning. Follow these steps to update your DynaFlex II GO Firmware:

### Set Profile to SmartTab <a href="#id-2.1_set_profile_to_smarttab" id="id-2.1_set_profile_to_smarttab"></a>

From the connect tab, ensure the Profile Name is set to SmartTab and Tap on the Device you want to connect to.&#x20;

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2Fgfp848wzxHGFmUFdqgDf%2Fimage.png?alt=media&amp;token=4895ddc9-1b9c-4e99-a1e5-276917aa4114" alt=""><figcaption></figcaption></figure>

### Update Firmware <a href="#id-2.2_update_firmware" id="id-2.2_update_firmware"></a>

After Connecting a DynaFlex II GO to RMS, press the Device tab. To update device firmware, check the Firmware option only, and press the Update button. Only the updates that are checked will be loaded to the device. A prompt will appear asking the user not to manually turn off the screen, press OK .

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2FrnWoPLeTaF0rGzKOaC8E%2Fimage.png?alt=media&amp;token=3fbfdfe6-a996-4a76-9385-08ddf752a66b" alt=""><figcaption></figcaption></figure>

#### Log Data <a href="#id-2.2.1_log_data" id="id-2.2.1_log_data"></a>

The log will indicate:

* If current configurations are up to date,
* If updates have succeeded,
* If updates have failed

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2FsdWnWhpiXfAFUC9OW4dj%2Fimage.png?alt=media&amp;token=4963598d-8e57-409a-ab8d-f5d39d661ca0" alt=""><figcaption></figcaption></figure>

### Load Selectable Card Data Encryption Key <a href="#id-2.3_load_selectable_card_data_encryption" id="id-2.3_load_selectable_card_data_encryption"></a>

To update or change your device’s configurations to include SCDE, begin by loading the SCDE Key:

* Tap on LoadSelectable\@CardDataEncryptionKey first.
* Press the Refresh to refresh the list of available configurations if LoadSelectable\@CardDataEncryptionKey does not appear.
* Press the Update button to load the key.

The log will indicate if the configuration update is successful or if it has failed.

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2FRhjsAB8K68xzvn1oqkf3%2Fimage.png?alt=media&amp;token=076d5102-bfb6-428b-9827-798c9d4b860b" alt=""><figcaption></figcaption></figure>

### Load SCDE Enable Name Expiration Date Service Code <a href="#id-2.4_load_scde_enable_name_expiration_dat" id="id-2.4_load_scde_enable_name_expiration_dat"></a>

To load SCDE Enable Name Expiration Date Service Code:

* Tap on SCDEEnableNameExpirationDateServiceCode first.
* Press the Refresh to refresh the list of available device updates if SCDEEnableNameExpirationDateServiceCode does not appear does not appear.
* Press the Update button to load the update.

The log will indicate if the configuration update is successful or if it has failed.

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2Fzn04HXSAUeViufZh4EJo%2Fimage.png?alt=media&amp;token=bd92080b-cbad-491f-9753-e6015fe6f036" alt=""><figcaption></figcaption></figure>

<figure><img src="https://3532725339-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FT525JoRd5ZFOd0Mq9DrF%2Fuploads%2F7PG9IXnItAYrccDIYAKD%2Fimage.png?alt=media&amp;token=64c8a0d8-5ed1-4c52-a700-204fd42330ef" alt=""><figcaption></figcaption></figure>

### Glossary of Terms

* API – Application Programming Interface
* EMV –Europay, MasterCard® and Visa®
* FAQs – Frequently Asked Questions
* KSN - Key Serial Number
* MUT - MagTek Update Token
* SDK – Software Developer’s Kit
* SN - Serial Number
* UIK - Unique Identifier Key


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://developer.magtek.com/services/reader-management-system/documentation/selectable-card-data-encryption-onboarding-ios.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
