This query string sends a batch of commands to the device and returns the raw response from the device.
?operation=
&httpMethod=
&readerArgument=
&destinationURL=
&passInData=Parameter
Description
operation
Operation to request from MagneFlex. Use: requestSendBatchCommand
httpMethod
Each input parameter supplied in the request is delimited by an ampersand character ‘&’, and the value for a parameter begins after an equal character ‘=’. Where ever a parameter contains multiple values, each are delimited by a comma character ‘,’.
Return Value:
The Batch Command response output in Hex string format of device raw response for this command.
commandResult
Result of a command sent to the device formatted as:
[command]-[result]
For each command sent in a batch is returned a separate commandResult. Example:
&commandResult=0900-000A9010010B355414000099 &commandResult=000100-000D31303030303033333534433033
&commandResult=1500-000103
passInData
Optional data to send to MagneFlex. This data will be passed back to the web app.
HTTP method to be used for the HTTP postback from MagneFlex. Use:
GET - returns the response data in the form of a query string. POST – recommended for EVM related transactions to accommodate limits on query string lengths.
readerArgument
Batch of commands that should be sent to reader. Commands are delimited by the bar character ‘|’.
Example:
readerArgument=0900|000100|1500
destinationURL
MagneFlex will send the postback to this URL.
requestLocation
Flag to send GPS location of the device from which Magneflex (iOS only) is hosted.
Use:
true – send location
false – do not send location
passInData
Optional data to send to MagneFlex. This data will be passed back to the web app.
Parameter
Description
errorCode
Error status. 0 is Success. Non-Zero is an error.
errorMessage
Description of the errorCode.
opType
The type of operation. For this command the value is:
SEND_BATCH_COMMAND_RESULT