Retrieves TLV version.
public string getTLVVersion()
Parameters: None
Return Value:
String representing TLV version as a two-byte hex string.
Retrieves track decode status. This is a one-byte value, which indicates the status of decoding track 1. Bit position zero indicates if there was an error decoding track 1 if the bit is set to one. If it is zero, then no error occurred. If a track has data on it that is not noise, and it is not decodable, then a decode error is indicated. If a decode error is indicated, the corresponding track data length value for the track that has the error will be set to zero and no valid track data will be supplied.
public string getTrackDecodeStatus()
Parameters: None Return Value:
Track Decode Status. Consists of three 2-byte hex values representing the decode status for tracks 1, 2, and 3 (respectively from left to right). Values are:
00 = Track OK
01 = Track read Error
02 = Track is Blank
Retrieves SDK version.
public string getSDKVersion()
Parameters: None Return Value:
The version information of the SDK.
Send command to device.
public int sendCommandToDevice(string command)
Parameters:
Return Value:
0 = Success
9 = Error
15 = Busy
This function starts an EMV L2 transaction for smart card.
public int startTransaction(
byte timeLimit,
byte cardType,
byte option,
Parameters:
Return Value:
0 = Success
9 = Error1
15 = Busy
This function sets the user selection result. It should be called after receiving the OnUserSelectRequest event which is triggered after the user makes a selection.
public int setUserSelectionResult(byte status, byte selection)
Parameters:
Return Value:
0 = Success
9 = Error
15 = Busy
This function sends to the device the transaction decision from acquirer.
public int setAcquirerResponse(byte[] response)
Parameters:
Return Value:
0 = Success
9 = Error
15 = Busy
This function cancels a transaction while waiting for the user to insert a card.
public int cancelTransaction ()
Parameters: None Return Value:
0 = Success
9 = Error
15 = Busy
Send extended command to device.
public int sendExtendedCommand(string command)
Parameters:
Return Value:
0 = Success
9 = Error
15 = Busy
Retrieves features for the device.
public MTDeviceFeatures getDeviceFeatures()
Parameters: None
Return Value:
Retrieves power management value for the device.
public String getPowerManagementValue()
Parameters: None
Return Value: Returns the PM value associated with the device.
byte[] amount,
byte transactionType,
byte[] cashBack,
byte[] currentCode,
byte reportingOption)
amount
Amount Authorized (EMV Tag 9F02, format n12, 6 bytes) in hex string.
For example: “000000000999”, means 9.99 dollars.
transactionType
Valid values:
0x00 = Purchase (listed as “Payment” on ICS)
0x01 = Cash Advance (not supported for this reader)
0x02 or 0x09 = Cash back (0x09 only supported when using contactless) 0x04 = Goods (Purchase)
0x08 = Services (Purchase)
0x10 = International Goods (Purchase) 0x20 = Refund
0x40 = International Cash Advance or Cash Back 0x80 = Domestic Cash Advance or Cash Back
cashBack
Cash back Amount (if non-zero, EMV Tag 9F03, format n12, 6 bytes) in hex string.
For example: “000000001000”, means 10.00 dollars.
currencyCode
Transaction Currency Code (EMV Tag 5F2A, format n4, 2 bytes) Sample Valid values:
0x0840 – US Dollar 0x0978 – Euro 0x0826 – UK Pound
reportingOption
This single byte field indicates the level of Transaction Status notifications the host desires to receive during the course of this transaction.
0x00 = Termination Status only
(normal termination, card error, timeout, host cancel)
0x01 = Major Status changes
(terminations plus card insertions and waiting on user)
0x02 = All Status changes
(documents the entire transaction flow)
Dynasty
PM3
DynaMAX
PM2
DynaPAD
DynaWave
eDynamo
PM3
Flash
PM1
iDynamo
iDynamo 5
IDynamo 5 Gen III
Home Banking (Dynamo LCD)
kDynamo
PM5
mDynamo
P-series and I-65 w/V5
pDynamo
PM6
sDynamo
SPI Encrypting IntelliHead V5
tDynamo
PM5
UART Enc IntelliHead V5
uDynamo
PM4
U-Finity
PM1
Parameter
Description
command
Command string to send to the device.
Parameter
Description
Card Type to Read:
0x01 = Magnetic Stripe (as alternative to EMV L2, card swipe causes abort of EMV L2)
0x02 = Contact chip card
0x03 = Magnetic Stripe and Contact chip Card. 0x04 = Contactless chip card
0x05 = Magnetic Stripe and Contactless chip card. 0x06 = Contact chip card and Contactless chip card.
0x07 = Magnetic Stripe, Contact chip card, Contactless chip card.
Refer to Supported Device Features for supported devices.
Parameter
Description
timeLimit
Specifies the maximum time, in seconds, allowed to complete the total transaction. This includes time for the user to insert the card, choose a language, choose an application, and online processing. If this time is exceeded, the transaction will be aborted, and an appropriate Transaction Status will be available. Value 0 is not allowed.
cardType
Card Type to Read:
0x01 = Magnetic Stripe (as alternative to EMV L2, card swipe causes abort of EMV L2)
0x02 = Contact chip card
0x03 = Magnetic Stripe and Contact chip Card. 0x04 = Contactless chip card
0x05 = Magnetic Stripe and Contactless chip card. 0x06 = Contact chip card and Contactless chip card.
0x07 = Magnetic Stripe, Contact chip card, Contactless chip card.
Refer to Supported Device Features for supported devices.
option
0x00 = Normal 0x01 = Bypass PIN 0x02 = Force Online
0x04 = Acquirer not available (Note: prevents long timeout on waiting for host approval) (causes “decline” to be generated internally if ARQC is generated)
To use Quick Chip mode, set the most significant bit to ‘1’.
0x80 = Quick Chip, Normal 0x81 = Quick Chip, Bypass PIN 0x82 = Quick Chip, Force Online
Refer to Supported Device Features for supported devices.
Parameter
Description
Status
Indicates the status of User Selection:
0x00 – User Selection Request completed, see Selection Result 0x01 – User Selection Request aborted, cancelled by user
0x02 – User Selection Request aborted, timeout
selection
Indicates the menu item selected by the user. This is a single byte zero based binary value.
Parameter
Description
response
The first two bytes (most significant byte first) indicate the total length of the following byte array. The byte array contains the ARQC Response message. See Appendix C for ARQC Response Message Format.
Parameter
Description
command
Hexadecimal string of the byte array for the extended command.
The first two bytes represent the value of the extended command.
The next two bytes (most significant byte first) indicate the total length of the following data in bytes.
Parameter
Power Management
BulleT KB BulleT SPP
PM1
cDynamo
Dynamag, Dynamag Duo, USB Enc IntelliHead V5
public class MTDeviceFeatures
{
bool MSR;
bool Contact;
bool Contactless;
bool PINPad;
bool MSRPowerSaver;
bool BatteryBackedClock;
bool SRED;
bool SignatureCapture;
bool ManualEntry; }