MTSCRA Class Methods - 41 - 50

getCardEncodeType

Retrieves the card encode type.

public string getCardEncodeType()

Parameters: None Return Value:

String representing the card encode type.

Card Encode Type

This is a string value which indicates the type of encoding that was found on the card. The following table defines the possible values.

Retrieves data field count.

public int getDataFieldCount()

Parameters: None

Return Value:

Data field count

Retrieves SHA-x hash code.

public string getHashCode()

Parameters: None Return Value:

String representing SHA-x hash code.

Retrieves device configuration.

public string getDeviceConfig(string configType)

Parameters:

configType can be one of:

• 8180: Send TLV Version on Power Up

• 8181: Send Discovery on Power Up

• 8280: Send Card name

• 8281: Send Card IIN

Return Value:

String representing device configuration.

Retrieves encryption status. This two-byte Binary field contains the Encryption Status. The Reader Encryption Status is sent in big endian byte order. Byte 1 is the least significant byte. Byte 1 LSB is status bit 0. Byte 2 MSB is status bit 15.

public string getEncryptionStatus()

Parameters: None Return Value:

String representing decryption status as a 2-byte binary field.

• Bit 0 = DUKPT Keys exhausted (1=exhausted, 0=keys available)

• Bit 1 = Initial DUKPT key Injected, always set to One (Primary DUKPT Key)

• Bit 2 = Encryption Enabled, always set to One

Retrieves firmware version.

public string getFirmware()

Parameters: None

Return Value:

String representing firmware version.

Retrieves MagTek device serial number.

public string getMagTekDeviceSerial()

Parameters: None

Return Value:

String representing MagTek device serial number.

Retrieves response data.

public string getResponseData()

Parameters: None

Return Value:

String representing response data.

Retrieves response type.

public string getResponseType()

Parameters: None

Return Value:

String representing response type. For Audio Reader, always “C101”.

Retrieves the value of the specified tag.

public string getTagValue(string tag, string data)

• Parameters: None

  • tag

    • Tag to search for

Return Value: String representing tag value.