Programmer's Manual
The DynaFlex II Go uses the shared Dyna-family Multi-Interface Card Reader Platform (MMS) command set. This manual is a device-scoped map into the API & Command Reference with the sections this device relies on linked below.
In this manual
Reference Section
Information Available
The full device Command matrix, if you're building for more than one Dyna reader.
How MMS requests, responses, and notifications are framed and parsed.
The shared TLV and EMV objects the commands carry.
The MMS command set, scoped to the Go, with a supported-commands view.
Asynchronous messages the Go sends during transactions, device events, and firmware updates.
Configurable properties and parameters.
These sections detail a variety of information on OIDs, codes, tips & taxes and more.
See Also
Security & Keys --> How the Go protects data and manages keys: DUKPT (3DES→AES), MAC, KSNs, encryption/decryption, and the PCI requirements like the 24-hour reset and device lock.
NFC/MIFARE -->Working with contactless cards and tags — NFC/MIFARE pass-through and the supported card technologies (NTag, Classic, DESFire, Plus).
Need More Help
80
2-4
I
Transaction amount (cents)
Required
03 E8 = 1000 ($10.00)
81
8
T
Terminal ID
Required
"TERM0001"
82
1
B
Transaction type
Required
00 = Purchase
83
1
B
Reader options (bitfield)
Optional
0F = All readers enabled
Last updated

