# Installation This section contains supporting information for the solution design team to develop solution-specific tools, software, and procedures. For detailed information about procedures the solution design team must develop before deployment, see section 1.8 About Solution Planning. Because every solution design is unique, the solution design team must develop and field test solution-specific installation procedures. Section 4.1 Example Installation Instructions provides a rudimentary example of device installation steps the solution design team may use as a starting point. --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://developer.magtek.com/hardware/oem-readers-and-components/oem-readers/odynamo/documentation/user-manuals/installation-and-operation-manual/installation.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.