Command 0x1F01 - Reset Device

The host uses this command to reset the device.

1

Construct the command request

The host constructs the command request for Command 0x1F01 - Reset Device in the format below.

2

Send the command request

The host sends the command request to the device.

3

Device responds

The device sends a response in the format below to the host.

4

Device resets

The device starts an automatic reset within 500ms.

Table - Request Data for Command 0x1F01 - Reset Device

Tag	Len	Value / Description	Typ	Req	Default
Beginning of any wrappers, at minimum including Request Message
1F01 = Command 0x1F01 - Reset Device
81	01	Power Off Option 0x00 = Reset 0x01 = Power Off Power off only works while a device is running on its battery. If a device is powered off while it is powered by USB, the device will immediately turn back on.	B	O	0x00
End of any wrappers, at minimum including Request Message

Table - Response Data for Command 0x1F01 - Reset Device

Tag	Len	Value / Description	Typ	Req	Default
Beginning of any wrappers, at minimum including Response Message
1F01 = Command 0x1F01 - Reset Device
No parameters.
End of any wrappers, at minimum including Response Message

Table - Request Example

Example (Hex)

AA 00 81 04 01 12 1F 01 84 02 1F 01

Table 165 - Response Example

Response Example (Hex)

AA 00 81 04 82 12 1F 01 82 04 00 00 00 00