Command 0x1004 - Resume Transaction

The host uses this command to provide the device with additional/modified data to resume a transaction that is currently paused.

Table - Request Data for Command 0x1004 - Resume Transaction

Tag	Len	Value / Description	Typ	Req	Default
Beginning of any wrappers, at minimum including Request Message
1004 = Command 0x1004 - Resume Transaction
81	01	Resume Code. Indicates the pause state the transaction will resume from: 0x00 = Waiting for ARPC	B	R
83	var	Reserved	B	O
84	var	ARPC Data. This contains an EMV ARPC Type.	B	R
86	var	Transaction TLV Update. Not applicable when Resume Code = Waiting for ARPC	B	O
End of any wrappers, at minimum including Request Message

Table - Response Data for Command 0x1004 - Resume Transaction

Tag	Len	Value / Description	Typ	Req	Default
Beginning of any wrappers, at minimum including Response Message
1004 = Command 0x1004 - Resume Transaction
No parameters.
End of any wrappers, at minimum including Response Message

If the request started successfully, the Request Status in the message wrapper is: OK, Started / Running, All good / requested operation was successful.

Table - Request Example

Request Example (Hex)

AA 00 81 04 01 00 10 04 84 21 10 04 81 01 00 82 01 78 84 17 FF 74 14 DF DF 25 08 99 26 90 E1 16
12 07 10 FA 06 70 04 8A 02 30 30

Table - Response Example

Response Example (Hex)

AA 00 81 04 82 06 10 04 82 04 00 00 00 00 84 02 10 04