Property Subgroup 1.2.3.nnn User Interface Settings - 1.2.3.1.3.1 - 1.2.3.2.1.1

Table - Property 1.2.3.1.3.1 Enable Card Logos Page at Startup

Property Description
Property OID	1.2.3.1.3.1 / 0x010203010301
Name	Enable Card Logos Page at Startup
Description	Enables a page at startup that displays supported payment type brand logos.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = Disable Logo Page at Startup 0x01 = Enable Logo Page at Startup
Default	0x00

Table - Get Request Example

Example (Hex)
AA 00 81 04 01 5E D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E3 06 E1 04 E3 02 C1 00

Table - Get Response Example

Example (Hex)
AA 00 81 04 82 5E D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05 E3 03 C1 01 00

Table - Set Request Example

Example (Hex)
AA 00 81 04 01 5D D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05 E3 03 C1 01 01

Table - Set Response Example

Example (Hex)
AA 00 81 04 82 5D D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05 E3 03 C1 01 01

Table - Property 1.2.3.1.3.2 Display Card Logo While Authorizing

Property Description	1.2.3.1.3.2 / 0x010203010302
Property OID
Name	Display Card Logo While Authorizing
Description	Enable display of logo for card brand used in transaction
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = Disable Logo 0x01 = Enable Logo
Default	0x00

Table - Get Request Example

Example (Hex)
AA 00 81 04 01 5E D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E3 06 E1 04 E3 02 C2 00

Table - Get Response Example

Example (Hex)
AA 00 81 04 82 5E D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05 E3 03 C2 01 00

Table - Set Request Example

Example (Hex)
AA 00 81 04 01 5D D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05 E3 03 C2 01 01

Table - Set Response Example

Example (Hex)
AA 00 81 04 82 5D D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05 E3 03 C2 01 01

Table - Property 1.2.3.2.1.1 System Volume Control

Property Description
Property OID	1.2.3.2.1.1 / 0x010203020101
Name	System Volume Control
Description	This property sets the output volume for all sounds the device produces after startup, expressed as a percentage range from 0% (no sound) to 100%. The volume setting takes effect immediately after the host changes it. Note that devices with limited volume control hardware allocate ranges of numbers to represent the same physical volume level (for example, 1..49 = Low, 50..100 = High).
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00..0x64
Default	0x32 (50%)

Table - Get Request Example

Example (Hex)
AA 00 81 04 01 5E D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E3 06 E2 04 E1 02 C1 00

Table - Get Response Example

Example (Hex)
AA 00 81 04 82 5E D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E2 05 E1 03 C1 01 32

Table - Set Request Example

Example (Hex)
AA 00 81 04 01 5D D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E2 05 E1 03 C1 01 01

Table - Set Response Example

Example (Hex)
AA 00 81 04 82 5D D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E2 05 E1 03 C1 01 01