Command 0x1F04 – Terminate Bluetooth® LE Connection (Bluetooth® LE Only)

The host can use this command to terminate a Bluetooth® LE connection. The host may also be able to terminate a Bluetooth® LE connection directly without using this command.

The sequence of events is as follows:

1

The host constructs the command request for Device in the format below.

2

The host sends the command request to the device.

3

The device sends a response in the format below to the host.

4

The device terminates the Bluetooth® LE connection within around 500 ms.

Table - Request Data for Command 0x1F04 – Terminate Bluetooth® LE Connection

Tag	Len	Value / Description	Typ	Req	Default
Beginning of any wrappers, at minimum including Request Message
1F04 = Command 0x1F04 – Terminate Bluetooth® LE Connection
No parameters.
End of any wrappers, at minimum including Request Message

Table - Response Data for Command 0x1F04 – Terminate Bluetooth® LE Connection

Tag	Len	Value / Description	Typ	Req	Default
Beginning of any wrappers, at minimum including Response Message
1F04 = Command 0x1F04 – Terminate Bluetooth® LE Connection
No parameters.
End of any wrappers, at minimum including Response Message

Table - Request Example

Example (Hex)

AA 00 81 04 01 55 1F 04 84 02 1F 04

Table - Response Example

Example (Hex)

AA 00 81 04 82 55 1F 04 82 04 00 00 00 00 84 02 1F 04