Introduction

DynaFlex II is a secure card reader authenticator engineered for attended, unattended, and mobile payment environments. The reader features a magnetic stripe reader, EMV chip reader for both contact and contactless cards, an optional barcode reader, and support for NFC-enabled mobile wallets such as Samsung Pay®, Google Pay®, Apple Pay®, and Apple VAS. DynaFlex II communicates with host devices via USB or wireless local area network (WLAN) on pin entry devices (PED). DynaFlex II products are compatible with iOS, Android, and Windows operating systems.

For details on how to set up Google Wallet Smart Tap for DynaFlex II, see D100006469 DYNAFLEX, DYNAPROX, DYNAFLEX II GO FAMILY - GOOGLE WALLET SMART TAP SETUP GUIDE. For

details on how to set up Apple VAS for DynaFlex II, see D998200597 DYNAFLEX II GO PROGRAMMER'S MANUAL (COMMANDS).

About Terminology

In this document, DynaFlex II products are referred to as the device or inclusively as DynaFlex II products. They are designed to be connected to a host, which is a piece of general-purpose electronic equipment which sends commands and data to, and receives data from, the device. Host types include PC and Mac computers/laptops, tablets, and smartphones. The host must have software installed that communicates with the device and is capable of processing transactions. During a transaction, the host and its software interact with the operator, such as a customer service representative, while the device interacts with the cardholder (even if the cardholder is using a virtual representation of the card account, such as a smartphone).

Throughout this document:

• DynaFlex II Product Family refers to all devices in the DynaFlex II family, including all DynaFlex II models and DynaFlex II PED models.

• DynaFlex II PED refers to DynaFlex II PED products with a display, including those with a kiosk back cover and barcode reader.

• DynaFlex II refers to DynaFlex II devices that are not equipped with a touchscreen display, including those with a kiosk back cover and barcode reader.

Magensa Services

DynaFlex II products can be paired with Magensa Services to make the certification cycle easier and remove unencrypted data from the payment environment. A service representative will collaborate with you to determine if Magensa Decrypt, Magensa Decrypt and Forward, or the Magensa Payment Protection Gateway is best for you.

MagTek Support

MagTek offers developer tools, including free software developer kits with APIs. For faster development, use MagneFlex Prism, a suite of interface tools for browser and middleware applications that streamline the development process. Instead of creating multiple interfaces for the hardware device, POS application, and gateway, you can use MagneFlex. It drives the hardware, interfaces with the POS app, and handles data processing commands.

Available Models and Accessories

Table - Available Models and Options

Part No.	Description	Display	Connection(s)
21078307	DYNAFLEX II, PCI, BLACK, USB	None	USB-C
21078309	DYNAFLEX II PED, PCI, TOUCHSCREEN DISPLAY, BLACK, USB	Touchscreen	USB-C
21078311	DYNAFLEX II PED, PCI, TOUCHSCREEN DISPLAY, BLACK, WLAN	Touchscreen	USB-C Wireless LAN
21078314	DYNAFLEX II KIOSK, PCI, BCR, BLACK, USB	None	USB-C
21078321	DYNAFLEX II PED, KIOSK, PCI, TOUCHSCREEN DISPLAY, BLACK, USB	Touchscreen	USB-C
21078322	DYNAFLEX II, KIOSK, PCI, BLACK, USB	None	USB-C
21078325	DYNAFLEX II PED, KIOSK, PCI, TOUCHSCREEN DISPLAY, BLACK, WLAN	Touchscreen	USB-C Wireless LAN
21078331	DYNAFLEX II, PCI, BCR, BLACK, USB	None	USB-C
21078332	DYNAFLEX II PED, PCI, TOUCHSCREEN DISPLAY, BCR, BLACK, WLAN	Touchscreen	USB-C Wireless LAN
21078333	DYNAFLEX II PED, PCI, TOUCHSCREEN DISPLAY, BCR, BLACK, USB	Touchscreen	USB-C
21078334	DYNAFLEX II PED, KIOSK, PCI, TOUCHSCREEN DISPLAY, BCR, BLACK, USB	Touchscreen	USB-C
All models are black by default and have countertop, handheld, and custom mounting options.

Table – DynaFlex II Accessories

Part #	Description	Accessory Notes
1000006016	CABLE, USB A - C, 6FT, DYNAFLEX	Included with DynaFlex products
1000006017	CABLE, USB C - C, 6FT, DYNAFLEX	Optional, specify in order
21078006	CHARGING STATION, DYNAFLEX	Optional, specify in order
96700004	CLEANING CARD, DOUBLE SIDED	Optional, specify in order
1000008559	FOOT, BACK, SIDE A, ADHESIVE MOUNTING STRIP, DYNAFLEX	Optional, specify 1 ea. for complete replacement
1000008560	FOOT, BACK, SIDE B, ADHESIVE MOUNTING STRIP, DYNAFLEX	Optional, specify 1 ea. for complete replacement
1000008561	FOOT, FRONT, ADHESIVE MOUNTING STRIP, DYNAFLEX	Optional, specify 1 ea. For complete replacement

About DynaFlex II Components

The major components of the DynaFlex II product family are detailed in this section. For models without a touchscreen display (DynaFlex II and DynaFlex II Kiosk), the components are identical however, the touchscreen and its bezel are replaced with a faceplate displaying the contactless indicator logo at the optimal contactless landing zone (see Figure 1-1).

Figure 1-1 - DynaFlex II Major components

DynaFlex II PED models without a barcode reader are also identical however, the edge incorporating the barcode reader is a single straight line and there is no QR code marking on the face of the device (see Figure 1-2).

Figure 1-2 - DynaFlex II PED BCR Major Components

Figure 1-3 illustrates the major components of the optional charging station. Note, the charging station is only compatible with non-kiosk models of the device.

Figure 1-3 - Charging Station Major Components