> For the complete documentation index, see [llms.txt](https://developer.magtek.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://developer.magtek.com/hardware/card-readers/mms-dyna-devices/dynaflex-ii-go/documents/developers-manuals/programmers-manual-commands/notifications/transactions/operation-complete.md).

# Operation Complete

## Notification 0x0105 - Transaction Operation Complete

This notification reports the final result of a transaction the host initiated using Command 0x1001 - Start Transaction.

For this notification, the Notification Detail described in section 3.2.2.3 Notification Message contains one byte each to indicate:

* The Payment Technology (PT) involved
* The Reason (Rsn) for the notification
* Detail (Det) about the notification that has different meanings depending on the Reason
* An Extra field (Ext) that has different meanings depending on the Reason

## Table - Notification Detail Codes (None / General)

<table><thead><tr><th width="293.18182373046875">PT</th><th width="74.45452880859375">Res</th><th width="73.45452880859375">Det</th><th width="70">Ext</th><th>Meaning</th></tr></thead><tbody><tr><td><p>Payment Technology 0x00 None contains transaction notification detail codes that are not specific to a particular payment technology.</p><ul><li>0x00 = Reserved</li><li>0x01 = Timeout/No Cards Detected</li><li>0x02 = Kernel Outcome</li><li>0x03 = Transaction Terminated</li><li>0x04 = Transaction Completed</li></ul></td><td></td><td></td><td></td><td></td></tr><tr><td>00</td><td>01</td><td>00</td><td>00</td><td>None, Timeout/No Cards Detected, Transaction Timed Out, Reserved</td></tr><tr><td>00</td><td>03</td><td>01</td><td>00</td><td>None, Transaction Terminated, Transaction Canceled by Host, Reserved</td></tr><tr><td>00</td><td>03</td><td>02</td><td>00</td><td>None, Transaction Terminated, Transaction Canceled by User, Reserved (Display Only)</td></tr></tbody></table>

## Table - Notification Detail Codes (None / General) - Manual Card Entry (MCE)

<table><thead><tr><th width="346.8182373046875">PT</th><th width="74.72723388671875">Res</th><th width="70.8182373046875">Det</th><th width="70.818115234375">Ext</th><th>Meaning</th></tr></thead><tbody><tr><td><p>Payment Technology 0x07 Manual Card Entry contains transaction notification detail codes involving manual card entry (MCE Only).</p><ul><li>0x00 = Reserved</li><li>0x01 = Timeout/No Cards Detected</li><li>0x02 = Kernel Outcome</li><li>0x03 = Transaction Terminated</li><li>0x04 = Transaction Completed</li></ul></td><td></td><td></td><td></td><td></td></tr><tr><td>07</td><td>03</td><td>05</td><td>00</td><td>MCE, Transaction Terminated, Transaction Canceled due to entry error, Reserved (MCE Only)</td></tr><tr><td>07</td><td>04</td><td>00</td><td>00</td><td>MCE, Transaction Completed, Reserved, Reserved (MCE Only)</td></tr></tbody></table>

## Table - Notification Detail Codes (None / General) - Magnetic Stripe Reader (MSR)

<table><thead><tr><th width="329.272705078125">PT</th><th width="75.45452880859375">Res</th><th width="74.3636474609375">Det</th><th width="72.6363525390625">Ext</th><th>Meaning</th></tr></thead><tbody><tr><td><p>Payment Technology 0x08 Magnetic Stripe Reader (MSR) contains transaction notification detail codes involving magnetic stripe cards (MSR Only).</p><ul><li>0x00 = Reserved</li><li>0x01 = Timeout/No Cards Detected</li><li>0x02 = Kernel Outcome</li><li>0x03 = Transaction Terminated</li><li>0x04 = Transaction Completed</li></ul></td><td></td><td></td><td></td><td></td></tr><tr><td>08</td><td>03</td><td>05</td><td>00</td><td>MSR, Transaction Terminated, Transaction Canceled Due To Card Read Error, Reserved (MSR Only)</td></tr><tr><td>08</td><td>02</td><td>06</td><td>00</td><td>MSR, Outcome, Approved, Reserved (MSR Only)</td></tr><tr><td>08</td><td>02</td><td>06</td><td>01</td><td>MSR, Outcome, Approved, Signature Capture Requested (MSR Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>08</td><td>02</td><td>06</td><td>04</td><td>MSR, Outcome, Approved, Signature Capture Available (MSR Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>08</td><td>02</td><td>06</td><td>05</td><td>MSR, Outcome, Approved, Signature Capture Success (MSR Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>08</td><td>02</td><td>06</td><td>06</td><td>MSR, Outcome, Approved, Signature Capture Fail (MSR Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>08</td><td>02</td><td>07</td><td>00</td><td>MSR, Outcome, Quick Chip Deferred, Reserved (MSR Only)</td></tr><tr><td>08</td><td>02</td><td>07</td><td>01</td><td>MSR, Outcome, Quick Chip Deferred, Signature Capture Requested (MSR Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>08</td><td>02</td><td>07</td><td>04</td><td>MSR, Outcome, Quick Chip Deferred, Signature Capture Available (MSR Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>08</td><td>02</td><td>07</td><td>05</td><td>MSR, Outcome, Quick Chip Deferred, Signature Capture Success (MSR Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>08</td><td>02</td><td>07</td><td>06</td><td>MSR, Outcome, Quick Chip Deferred, Signature Capture Fail (MSR Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>08</td><td>02</td><td>80</td><td>00</td><td>MSR, Outcome, Declined, Reserved (MSR Only)</td></tr><tr><td>08</td><td>02</td><td>80</td><td>01</td><td>MSR, Outcome, Declined, Signature Capture Requested (MSR Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>08</td><td>02</td><td>80</td><td>04</td><td>MSR, Outcome, Declined, Signature Capture Available (MSR Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>08</td><td>02</td><td>80</td><td>05</td><td>MSR, Outcome, Declined, Signature Capture Success (MSR Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>08</td><td>02</td><td>80</td><td>06</td><td>MSR, Outcome, Declined, Signature Capture Fail (MSR Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr></tbody></table>

## Table - Notification Detail Codes (None / General) - Payment Technology 0x10 — EMV Contact (“ICC”)

<table><thead><tr><th width="328.272705078125">PT</th><th width="74.45458984375">Res</th><th width="74.3636474609375">Det</th><th width="75.3636474609375">Ext</th><th>Meaning</th></tr></thead><tbody><tr><td><p>Payment Technology 0x10 EMV Contact (“ICC”) contains transaction notification detail codes involving contact chip cards (EMV Contact Only).</p><ul><li>0x00 = Reserved</li><li>0x01 = Timeout, no cards detected</li><li>0x02 = Kernel Outcome</li><li>0x03 = Transaction Terminated</li><li>0x04 = Transaction Completed</li></ul></td><td></td><td></td><td></td><td></td></tr><tr><td>10</td><td>02</td><td>08</td><td>03</td><td>ICC, Kernel Outcome, Failed, MSR Fallback (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>09</td><td>03</td><td>ICC, Kernel Outcome, Empty Candidate List, MSR Fallback (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>00</td><td>00</td><td>ICC, Kernel Outcome, None, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>00</td><td>02</td><td>ICC, Kernel Outcome, None, Technical Fallback (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>0F</td><td>02</td><td>ICC, Kernel Outcome, End Application, Technical Fallback (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>01</td><td>00</td><td>ICC, Kernel Outcome, Try Another Interface, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>01</td><td>03</td><td>ICC, Kernel Outcome, Try Another Interface, MSR Fallback (EMV Contact Only) Device Driven Fallback must be disabled and MSR channel is enabled</td></tr><tr><td>10</td><td>02</td><td>02</td><td>00</td><td>ICC, Kernel Outcome, Offline Approved, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>02</td><td>01</td><td>ICC, Kernel Outcome, Offline Approved, Signature Capture Requested (EMV Contact Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>10</td><td>02</td><td>02</td><td>04</td><td>ICC, Kernel Outcome, Offline Approved, Signature Capture Available (EMV Contact Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>10</td><td>02</td><td>02</td><td>05</td><td>ICC, Kernel Outcome, Offline Approved, Signature Capture Success (EMV Contact Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>10</td><td>02</td><td>02</td><td>06</td><td>ICC, Kernel Outcome, Offline Approved, Signature Capture Fail (EMV Contact Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>10</td><td>02</td><td>03</td><td>00</td><td>ICC, Kernel Outcome, Offline Declined, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>04</td><td>00</td><td>ICC, Kernel Outcome, Offline Failed, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>05</td><td>00</td><td>ICC, Kernel Outcome, Offline Not Accepted, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>06</td><td>00</td><td>ICC, Kernel Outcome, Approved, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>06</td><td>01</td><td>ICC, Kernel Outcome, Approved, Signature Capture Requested (EMV Contact Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>10</td><td>02</td><td>06</td><td>04</td><td>ICC, Kernel Outcome, Approved, Signature Capture Available (EMV Contact Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>10</td><td>02</td><td>06</td><td>05</td><td>ICC, Kernel Outcome, Approved, Signature Capture Success (EMV Contact Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>10</td><td>02</td><td>06</td><td>06</td><td>ICC, Kernel Outcome, Approved, Signature Capture Fail (EMV Contact Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>10</td><td>02</td><td>07</td><td>00</td><td>ICC, Kernel Outcome, Quick Chip Deferred, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>07</td><td>01</td><td>ICC, Kernel Outcome, Quick Chip Deferred, Signature Capture Requested (EMV Contact Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>10</td><td>02</td><td>07</td><td>04</td><td>ICC, Kernel Outcome, Quick Chip Deferred, Signature Capture Available (EMV Contact Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>10</td><td>02</td><td>07</td><td>05</td><td>ICC, Kernel Outcome, Quick Chip Deferred, Signature Capture Success (EMV Contact Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>10</td><td>02</td><td>07</td><td>06</td><td>ICC, Kernel Outcome, Quick Chip Deferred, Signature Capture Failed (EMV Contact Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>10</td><td>02</td><td>08</td><td>00</td><td>ICC, Kernel Outcome, Failed, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>09</td><td>00</td><td>ICC, Kernel Outcome, Not Accepted, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>0A</td><td>00</td><td>ICC, Kernel Outcome, Transaction Canceled, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>0B</td><td>00</td><td>ICC, Kernel Outcome, Select Next Not Accepted, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>0C</td><td>00</td><td>ICC, Kernel Outcome, Select Next Retry, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>0D</td><td>00</td><td>ICC, Kernel Outcome, Try Again, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>0E</td><td>00</td><td>ICC, Kernel Outcome, Online Request, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>0F</td><td>00</td><td>ICC, Kernel Outcome, End Application, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>10</td><td>00</td><td>ICC, Kernel Outcome, Not EMV Card Pooled, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>80</td><td>00</td><td>ICC, Kernel Outcome, Declined, Reserved (EMV Contact Only)</td></tr><tr><td>10</td><td>02</td><td>80</td><td>01</td><td>ICC, Kernel Outcome, Declined, Signature Capture Requested (EMV Contact Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>10</td><td>02</td><td>80</td><td>04</td><td>ICC, Kernel Outcome, Declined, Signature Capture Available (EMV Contact Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>10</td><td>02</td><td>80</td><td>05</td><td>ICC, Kernel Outcome, Declined, Signature Capture Success (EMV Contact Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>10</td><td>02</td><td>80</td><td>06</td><td>ICC, Kernel Outcome, Declined, Signature Capture Failed (EMV Contact Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>10</td><td>04</td><td>07</td><td>00</td><td>ICC, Transaction Completed, Declined, Reserved (EMV Contact Only)</td></tr></tbody></table>

## Table - Notification Detail Codes (None / General) - Payment Technology 0x20 — EMV Contactless (“PICC”)

<table><thead><tr><th width="338.3636474609375">PT</th><th width="77.272705078125">Res</th><th width="73.45458984375">Det</th><th width="72.6363525390625">Ext</th><th>Meaning</th></tr></thead><tbody><tr><td><p>Payment Technology 0x20 EMV Contactless (“PICC”) contains transaction notification detail codes involving contactless cards and contactless payment devices (EMV Contactless Only).</p><ul><li>0x00 = Reserved</li><li>0x01 = Timeout, no cards detected</li><li>0x02 = Kernel Outcome</li><li>0x03 = Transaction Terminated</li><li>0x04 = Transaction Completed</li></ul></td><td></td><td></td><td></td><td></td></tr><tr><td>20</td><td>02</td><td>00</td><td>00</td><td>PICC, Kernel Outcome, None, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>01</td><td>00</td><td>PICC, Kernel Outcome, Try Another Interface, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>02</td><td>00</td><td>PICC, Kernel Outcome, Offline Approved, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>02</td><td>01</td><td>PICC, Kernel Outcome, Offline Approved, Signature Capture Requested (EMV Contactless Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>20</td><td>02</td><td>02</td><td>04</td><td>PICC, Kernel Outcome, Offline Approved, Signature Capture Available (EMV Contactless Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>20</td><td>02</td><td>02</td><td>05</td><td>PICC, Kernel Outcome, Offline Approved, Signature Capture Success (EMV Contactless Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>20</td><td>02</td><td>02</td><td>06</td><td>PICC, Kernel Outcome, Offline Approved, Signature Capture Fail (EMV Contactless Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>20</td><td>02</td><td>03</td><td>00</td><td>PICC, Kernel Outcome, Offline Declined, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>04</td><td>00</td><td>PICC, Kernel Outcome, Offline Failed, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>05</td><td>00</td><td>PICC, Kernel Outcome, Offline Not Accepted, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>06</td><td>00</td><td>PICC, Kernel Outcome, Approved, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>06</td><td>01</td><td>PICC, Kernel Outcome, Approved, Signature Capture Requested (EMV Contactless Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>20</td><td>02</td><td>06</td><td>04</td><td>PICC, Kernel Outcome, Approved, Signature Capture Available (EMV Contactless Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>20</td><td>02</td><td>06</td><td>05</td><td>PICC, Kernel Outcome, Approved, Signature Capture Success (EMV Contactless Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>20</td><td>02</td><td>06</td><td>06</td><td>PICC, Kernel Outcome, Approved, Signature Capture Fail (EMV Contactless Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>20</td><td>02</td><td>07</td><td>00</td><td>PICC, Kernel Outcome, Quick Chip Deferred, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>07</td><td>01</td><td>PICC, Kernel Outcome, Quick Chip Deferred, Signature Capture Requested (EMV Contactless Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>20</td><td>02</td><td>07</td><td>04</td><td>PICC, Kernel Outcome, Quick Chip Deferred, Signature Capture Available (EMV Contactless Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>20</td><td>02</td><td>07</td><td>05</td><td>PICC, Kernel Outcome, Quick Chip Deferred, Signature Capture Success (EMV Contactless Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>20</td><td>02</td><td>07</td><td>06</td><td>PICC, Kernel Outcome, Quick Chip Deferred, Signature Capture Failed (EMV Contactless Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>20</td><td>02</td><td>08</td><td>00</td><td>PICC, Kernel Outcome, Failed, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>09</td><td>00</td><td>PICC, Kernel Outcome, Not Accepted, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>0A</td><td>00</td><td>PICC, Kernel Outcome, Transaction Canceled, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>0B</td><td>00</td><td>PICC, Kernel Outcome, Select Next Not Accepted, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>0C</td><td>00</td><td>PICC, Kernel Outcome, Select Next Retry, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>0D</td><td>00</td><td>PICC, Kernel Outcome, Try Again, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>0E</td><td>00</td><td>PICC, Kernel Outcome, Online Request, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>0F</td><td>00</td><td>PICC, Kernel Outcome, End Application, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>10</td><td>00</td><td>PICC, Kernel Outcome, Not EMV Card Pooled, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>80</td><td>00</td><td>PICC, Kernel Outcome, Declined, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>02</td><td>80</td><td>01</td><td>PICC, Kernel Outcome, Declined, Signature Capture Requested (EMV Contactless Only) If the device includes a touchscreen, the host should respond by sending Command 0x1801 - Request Cardholder Signature (Touch Only).</td></tr><tr><td>20</td><td>02</td><td>80</td><td>04</td><td>PICC, Kernel Outcome, Declined, Signature Capture Available (EMV Contactless Only) (MAGTEK INTERNAL ONLY FOR NOW, not yet implemented)</td></tr><tr><td>20</td><td>02</td><td>80</td><td>05</td><td>PICC, Kernel Outcome, Declined, Signature Capture Success (EMV Contactless Only) The device includes signature data inside EMV Batch Data Type tag DFDF3E.</td></tr><tr><td>20</td><td>02</td><td>80</td><td>06</td><td>PICC, Kernel Outcome, Declined, Signature Capture Failed (EMV Contactless Only) The host may send Command 0x1801 - Request Cardholder Signature (Touch Only) to retry capturing a signature.</td></tr><tr><td>20</td><td>04</td><td>07</td><td>00</td><td>PICC, Transaction Completed, Declined, Reserved (EMV Contactless Only)</td></tr><tr><td>20</td><td>05</td><td>00</td><td>00</td><td>PICC, NFC TAG, Tag Removed, Reserved (EMV Contactless Only)</td></tr></tbody></table>

## Table - Notification Example

{% code title="Example (hex)" %}

```
AA 00 81 04 83 00 01 05 82 04 20 00 00 00
```

{% endcode %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://developer.magtek.com/hardware/card-readers/mms-dyna-devices/dynaflex-ii-go/documents/developers-manuals/programmers-manual-commands/notifications/transactions/operation-complete.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.