NFC/MIFARE Pass Through

Command Group 0x11nn - NFC/MIFARE Pass Through Commands (Contactless Only)

This section of the DynaFlex II Go Programmer's Manual lists avaiable commands to initiate various NFC/MIFARE Pass Through Commands in the device.

Sunsections

Pass Through for NTAG/MIFARE Ultralight >

Pass Through for MIFARE Classic/MINI/Plus SL1 >

Pass Through for MIFARE DESFire >

Pass Through for MIFARE Plus >

Need Help?

For additional support, please contact MagTek Support:

Technical Support:

• 📧 Email: [e-mail]

• 📞 Phone: [phone] (US) | [phone] (International)

• 🕐 Hours: Monday-Friday, 6:00 AM - 5:00 PM PST

Online Resources:

• 🌐 Support Portal: https://www.magtek.com/support

• 📚 Knowledge Base: https://support.magtek.com

• 💬 Developer Forum: https://forum.magtek.com

Documentation Feedback:

Help us improve this documentation! Submit feedback