LED Behavior: Successful Transactions

BCR Payment Transaction Successful (Connected via USB)

When the operator presses the Start button on the host device, LED 1,2, and the BCR status light will be illuminated see the Figure below. When a barcode is detected, only LED 1 will remain illuminated, the BCR status LED will be off, and a long beep will sound see the next Figure.

Figure – BCR Transaction USB Ready State

Figure – BCR Transaction Barcode Detected (Connected via USB)

MSR Payment Transaction Successful (Connected via USB)

When the operator presses the Start transaction button on the host device, LED 1 and 2 will remain on. When a card is swiped, LEDs 1,2 and 4 will turn on in sequence (1,2 then 4), followed by a long beep, indicating a successful transaction, see the Figure below. After a successful transaction, the device will return to the ready state, see the next Figure.

Figure – LED Sequence – Payment Transaction Successful MSR Swipe (Connected via USB)

Figure – Return to Ready State After Successful Transaction

EMV Contact Payment Transaction Successful (Connected via USB)

When the operator presses the Start transaction button on the host device, LED 1 and 2 will remain on. When a card is inserted, LEDs 1, 2 and 4 will turn on in sequence, followed by a long beep, indicating a successful transaction, see Figure 7-20 – LED Sequence – Payment Transaction Successful EMV Contact (Connected via USB). LED 4 will remain on, and the device will sound a double beep until the card is removed from the slot. After a successful transaction, the device will return to the ready state, see Figure 7-19.

Figure – LED Sequence – Payment Transaction Successful EMV Contact (Connected via USB)

EMV Contactless Payment Transaction Successful (Connected via USB)

When the operator presses the Start transaction button on the host device, LED 1 will remain on. When a card is presented within range of the contactless reader, LEDs 1,2,3, and 4 will turn on in sequence, followed by a long beep, indicating a successful transaction, see Figure 7-21 - LED Sequence – Payment Transaction Successful EMV Contactless (Connected via USB). After a successful transaction, the device will return to the ready state, see Figure 7-19.

Figure - LED Sequence – Payment Transaction Successful EMV Contactless (Connected via USB)

BCR Payment Transaction Successful (Connected via Bluetooth® LE)

When the operator presses the button on the host device, LED 1,2, and the BCR status light will be illuminated see Figure 7-22. When a barcode is detected, only LED 1 will remain illuminated, the BCR status LED will be off, and a long beep will sound see Figure 7-23.

Figure 7-22 – BCR Transaction Bluetooth® LE Ready State

Figure – BCR Transaction Barcode Detected (Connected via Bluetooth® LE)

MSR Payment Transaction Successful (Connected via Bluetooth® LE)

When the operator presses the transaction button on the host device, LED 1 and 2 will remain on. When a card is swiped, LEDs 1,2 and 4 will turn on in sequence (1,2, then 4), followed by a long beep, indicating a successful transaction, see Figure 7-24. After a successful transaction, the device will return to the ready state, see Figure 7-25.

Figure – LED Sequence – Payment Transaction Successful MSR Swipe (Connected via Bluetooth® LE)

Figure – Return to Ready State After Successful Transaction (Bluetooth® LE Ready State)

EMV Contact Payment Transaction Successful (Connected via Bluetooth® LE)

When the operator presses the transaction button on the host device, LED 1 and 2 will remain on. When a card is inserted, LEDs 1,2 and 4 will turn on in sequence, followed by a long beep, indicating a successful transaction, see Figure 7-26 - LED Sequence – Payment Transaction Successful EMV Contact (Connected via Bluetooth® LE). LED 4 will remain on and the device will sound a double beep until the card is removed from the slot. After a successful transaction, the device will return to the ready state, see Figure 7-25.

Figure - LED Sequence – Payment Transaction Successful EMV Contact (Connected via Bluetooth® LE)

EMV Contactless Payment Transaction Successful (Connected via Bluetooth® LE)

When the operator presses the Start transaction button on the host device, LED 1 will remain on from ready state. When a card is presented within range of the contactless reader, LEDs 1,2,3, and 4 will turn on in sequence, followed by a long beep, indicating a successful transaction, see Figure 7-27. After a successful transaction, the device will return to the ready state, see Figure 7-25.

Figure - LED Sequence – Payment Transaction Successful EMV Contactless (Connected via Bluetooth® LE)