LED Behavior: Errors, Timeouts, and Canceled Transactions

Table - LED Behavior for Errors, Timeouts, and Canceled Transactions, contains LED behavior related to errors, timeouts, and canceled transactions. If the device is exhibiting LED behavior not previously mentioned, it may be contained in this section.

Table - LED and BCR Indicator Light ON/OFF State

LED
BCR Indicator Light

Table - LED Behavior for Errors, Timeouts, and Canceled Transactions

Device Model	Error LED Behavior	Timeout LED Behavior	Cancel LED Behavior
DynaFlex II Go BCR Connected via USB	LED 1,2 ON – BCR ON > LED1,2 ON, BCR OFF + Double Beeps > Ready	LED1,2,3 OFF – LED 4 BCR ON + Double Beeps	LED 1,2 ON – BCR ON > LED1,2 ON – BCR OFF + Double Beeps > Ready
DynaFlex II Go BCR Connected via Bluetooth® LE	LED 1,2 ON – BCR ON > LED1,2 ON, BCR OFF + Double Beeps > Ready	LED1,2,3 OFF – LED 4 BCR ON + Double Beeps	LED 1,2 ON - BCR ON > LED1,2 ON - BCR OFF + Double Beeps > Ready
DynaFlex II Go MSR Connected via USB	LED 1,2 ON > LED1,2,3 OFF – LED 4 ON + Double beeps	LED1,2,3 OFF – LED4 ON + Double beeps	LED 1,2 ON > LED1,2 ON + Double Beeps > Ready

Device Model	Error LED Behavior	Timeout LED Behavior	Cancel LED Behavior
DynaFlex II Go MSR Connected via Bluetooth® LE	LED 1,2 ON > LED1,2,3 OFF – LED 4 ON + Double beeps	LED1,2,3 OFF – LED 4 ON + Double beeps	LED 1,2 ON > LED1,2 ON + Double Beeps > Ready
DynaFlex II Go EMV Contact Connected via USB	LED 1,2 ON > LED1,2,3 OFF – LED 4 ON + Double beeps	LED 1,2,3 OFF – LED 4 ON + Double Beeps	LED 1 ON > LED1 ON + Double Beeps > Ready
DynaFlex II Go EMV Contact Connected via Bluetooth® LE	LED 1,2 ON > LED1,2,3 OFF – LED 4 ON + Double Beeps	LED 1,2,3 OFF – LED 4 ON + Double Beeps	LED 1,2 ON > LED1,2 ON + Double Beeps > Ready
DynaFlex II Go EMV Contactless Connected via USB	LED 1 ON > LED1,2,3 OFF – LED 4 ON + Double beeps	LED 1,2,3 OFF – LED4 ON + Double beeps	LED 1 ON > LED1 ON + Double Beeps > Ready

Device Model	Error LED Behavior	Timeout LED Behavior	Cancel LED Behavior
DynaFlex II Go EMV Contactless Connected via Bluetooth® LE	LED 1 ON > LED1,2,3 OFF – LED 4 ON + Double Beeps	LED 1,2,3 OFF – LED4 ON + Double Beeps	LED 1 ON > LED1 ON + Double Beeps > Ready