About Connections and Data Formats

MMS products transmit data using a set of common data formats across a variety of physical connection layers, which can include universal serial bus (USB) acting as a vendor-defined HID device (“USB HID”), wireless LAN (WLAN), Bluetooth®, Bluetooth® Low Energy (“Bluetooth® LE”), RS- 232, Apple Lightning, and so on. The set of available physical connection types and the data formats available on each connection type is device dependent. Table 2 shows the physical connection types available on each product, and the data formats supported on each connection type for that device. Details about connection types and formats can be found in Section 2 Connection Types. Section headings in this document include tags that indicate which connection types and/or data formats they apply to.

Table - Device Connection Types / Data Formats

Product / Connection	Bluetooth® LE GATT	RS-232 / UART	USB HID	WLAN	iAP2	Ethernet
DynaFlex with USB Only			HID
DynaFlex w/Bluetooth® LE (MAGTEK INTERNAL ONLY FOR NOW)	GATT		HID
DynaFlex Pro with USB Only			HID
DynaFlex Pro w/Bluetooth® LE (MAGTEK INTERNAL ONLY FOR NOW)	GATT		HID
DynaFlex Pro w/WLAN			HID	WLAN
DynaFlex Pro w/Ethernet (MAGTEK INTERNAL ONLY FOR NOW)			HID			Ethernet
DynaProx		SLIP	HID		iAP2- USB
DynaFlex II with USB Only			HID
DynaFlex II w/Bluetooth® LE (MAGTEK INTERNAL ONLY FOR NOW)	GATT		HID
DynaFlex II PED with USB Only			HID
DynaFlex II PED w/Bluetooth® LE (MAGTEK INTERNAL ONLY FOR NOW)	GATT		HID
DynaFlex II PED w/WLAN			HID	WLAN

Table Device Connection Types / Data Formats

Product / Connection	Bluetooth® LE GATT	RS-232 / UART	USB HID	WLAN	iAP2	Ethernet
DynaFlex II PED w/Ethernet (MAGTEK INTERNAL ONLY FOR NOW)			HID			Ethernet
DynaFlex II Go with USB Only			HID		iAP2- USB
DynaFlex II Go w/Bluetooth® LE	GATT		HID		iAP2- USB