> For the complete documentation index, see [llms.txt](https://developer.magtek.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://developer.magtek.com/hardware/card-readers/magnetic-stripe-readers/idynamo-5-gen-iii/documentation/user-manuals/installation-and-operation-manual/handling-and-storage.md).

# Handling and Storage

{% hint style="danger" %}
Proper handling of the device throughout delivery, assembly, shipping, installation, usage, and maintenance is very important. Not following the guidelines in this document could damage the device, render it inoperable, and/or violate the conditions of the warranty.
{% endhint %}

#### Handling to Avoid Damage

Upon receiving the device, inspect it to make sure it originated from an authentic source and has not been tampered with. For details, see *iDynamo 5 Gen III SRED, Device Inspection Manual*, available from MagTek.

 From device delivery through assembly, shipping, installation, usage, and maintenance, the device must not be exposed to conditions outside the ratings in Appendix A Technical Specifications.

 If the device is exposed to cold temperatures, adjust it to warmer temperatures gradually to avoid condensation, which can interfere with the operation of the device or cause permanent damage.

Do not drop or shake the device.

For information about ongoing maintenance of the device, such as cleaning, see section 7 Maintenance.

#### Handling to Avoid Accidental Tamper <a href="#id-3.2_handling_to_avoid_accidental_tamper" id="id-3.2_handling_to_avoid_accidental_tamper"></a>

iDynamo 5 products that are PCI certified implement an active tamper detection, which uses a small amount of electricity even when the device is completely powered off. To avoid accidental tamper events follow these precautions:

* Store the device at the lowest reasonable temperatures within its specified storage temperature range (see Appendix A Technical Specifications). Storing at temperatures between -4°F to 113°F (-20°C to 45°C).
* Do not drop or shake the device.
* Do not attempt to disassemble the device.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://developer.magtek.com/hardware/card-readers/magnetic-stripe-readers/idynamo-5-gen-iii/documentation/user-manuals/installation-and-operation-manual/handling-and-storage.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.