Component Details
The arrangement of the four LED indicators on DynaFlex II Go devices is illustrated in Figure 7-2. The LEDs are designated 1 to 4 and are ordered from left to right on the device.

Figure - LED Ordering
LED Status
When DynaFlex II Go is powered on, its LEDs will illuminate green, when it is powered off, the LEDs will remain unlit.
The figure below illustrates the On/Off status of the LEDs.

Figure - LED ON/OFF
BCR Status
DynaFlex II Go devices equipped with a bar code reader have a status LED that indicates whether the barcode feature is scanning.

BRC Status Light On BCR Status Light OFF
Figure - BCR Status LED
Beeper Alert
All DynaFlex II Go devices are equipped with a beeper that produces a short beep lasting for half a second and a long beep that lasts for one second.
Last updated

