The device sends this notification when the battery charger detects that the battery is fully charged. This only occurs when the device is powered by a USB power source. See Notification Message Format and Battery Charged Notification Example.
AA 00 81 04 83 00 10 01 82 00 02 02 00Beginning of Notification Message
1001 = Device Information Update
AA00 81 04 83001001 82 04 00000000 84 08 1001 81 01 02 82 01 00Beginning of Notification Message
AA00 81 04 83001001 82 04 00000000 84 08 1001 81 04 00 80 00 80Beginning of Notification Message
AA00 81 04 83001001 82 04 00000000 84 0B 1001 81 01 00 82 01 00 83 01 05Beginning of Notification Message
Beginning of Notification Message
AA 00 81 04 83 00 10 01 82 04 01 00 01 00 84 0E 10 01 84 0A DF 79 07 04 37 1F 71 BF 61 8081
var
This parameter has the same length and value described by Property 2.3.1.2.1.1 - Device Operational Status.
B
R
82
var
This parameter has the same length and value described by Property 2.3.1.2.1.2. - Offline Status Detail.
B
R
xx
var
More data objects may be added in future firmware revisions.
End of Notification Message
1001 = Device Information Update
81
04
Press / Release Coordinates Coordinates of the press / release from origin 0,0 at the top left corner of the display, automatically adjusted to match the device’s orientation as configured by Property 1.2.3.1.1.2 - Custom Idle Page Image Device Locked (Display Only). Bytes 1..2 X Coordinate X coordinate of press / release, in big endian order. Bytes 3..4 Y Coordinate Y Coordinate of press / release, in big endian order.
B
R
End of Notification Message
1001 = Device Information Update
81
1
Interface 0x00 = WLAN
B
R
82
1
Connection 0x00 = Connection 0, Interfaces that only support one connection will use connection 0. WLAN will always set this to 0 even if the device is configured to support more than one connection with Property 1.2.2.1.1.A - Maximum Client Connections since there is only a single session for all clients. See Command 0x1F03 - Extend Session (Session Management Only) for more information on this scenario.
B
R
83
1
Expiration Time The time in minutes until the session expires.
B
R
xx
var
More data objects may be added in future firmware revisions.
End of Notification Message
1001 = Device Information Update
81
1
This parameter has the same length and value described by Property 1.2.2.1.1.B - Certificate Expiring Soon Notification Threshold.
B
R
82
1
This parameter contains the certificate identifier. See the certificate file type section (File Type 0x03) from File Types to identify this certificate by locating the certificate that has a File Subtype that matches this certificate identifier.
B
R
83
1
The number of days the certificate is still valid.
B
R
End of Notification Message
1001 = Device Information Update
84
var
NFC Payload
B
R
/DF79
var
NFC UID
B
R
End of Notification Message