The host uses this command to prompt a cardholder for customer information.
1
Ensure device is idle
The host ensures the device is not currently running another command (for example, it is not running a transaction using Command 0x1001 - Start Transaction.
2
Compose command
If the host determines it should request customer information, it composes a command request in the format described below.
3
The device presents a keypad interface to the cardholder on the display.
4
The device sends 7.5.3 Notification 0x1805 - User Interface Operation Complete to the host to report data available, or hardware failure.
5
If the device reported data available, the host can retrieve the data as defined in Table 350 – Notification Detail Codes and Table 352 – Notification Payload for Personal Info Entry.
Tag
Len
Value / Description
Typ
Req
Default
Tag
Len
Value / Description
Typ
Req
Default
If the request started successfully, the Request Status in the message wrapper is: OK, Started / Running, All good / requested operation was successful.
1806 = Command 0x1806 – Personal Info Entry
81
01
Capture Type
0x01 = Phone Number: Capture the phone number
0x02 = Social: Capture the social security number
0x03 = Zip code: Capture the zip code
0x04 = Employee ID: Capture Employee ID number
0x05 = Birth Date: Capture birth date in USA format
0xFF = Cancel Capture: Cancel any of the capture commands
B
R
82
01
Encryption for user data (Optional)
00 – No Encrypt
01 - Encrypt
B
R
Beginning of any wrappers, at minimum including Request Message
1806 = Command 0x1806 – Personal Info Entry
No parameters.
Beginning of any wrappers, at minimum including Response Message
Beginning of any wrappers, at minimum including Request Message
Beginning of any wrappers, at minimum including Response Message
Present keypad
Device notifies host
Host retrieves data
Request Data for Command 0x1806 – Personal Info Entry