The device’s firmware can be compiled to use one of two available ECDSA P-521 key sets when signing and verifying the signature in Command 0xEEEE - Send Secured Command to Device.
This property indicates which of the two keys the firmware is configured to expect the host and device to use:
NFC Hardware’s Firmware Version - Property 2.1.2.9.1.1
Property Description
Property OID
2.1.2.9.1.1 / 0x020102090101
Name
NFC Hardware’s Firmware Version
Securing Key
None
Min. Len (b)
2
Max. Len (b)
2
Data Type
Binary
Valid Values
0 - 255
Default
None
Description
The device uses this two-byte property, in most significant byte order, to report its NFC Hardware’s Firmware version. MS byte is major version. LS byte is minor version.
The device uses this two-byte property, in most significant byte order, to report its NFC Hardware’s EEPROM version. MS byte is major version. LS byte is minor version.
Firmware Identification Information - Get Request Example
Firmware Identification Information - Get Response Example
Boot1 Firmware Part Number - Property 2.1.2.1.1.4
Boot1 Firmware Part Number - Get Request Example
Boot1 Firmware Part Number - Get Response Example
Boot0 Firmware Version - Property 2.1.2.1.2.2
Boot0 Firmware Version - Get Request Example
Boot0 Firmware Version - Get Response Example
Boot0 Firmware Part Number - Property 2.1.2.1.2.4
Boot0 Firmware Part Number - Get Request Example
Boot0 Firmware Part Number - Get Response Example
2.1.2.nnn - Firmware Identification Information
Firmware Identification Information
This section details settings about the device's top-level firmware identifier — the composite firmware ID that ties together the individual component versions and checksums listed below.
Applies to: All Dyna Family products
Settings in this group
Notification
Information
The device's top-level firmware identifier — the composite firmware ID that ties together the individual component versions and checksums listed below.
Part number, version, and build details for the device's core application firmware — the main firmware that runs the reader.
The device uses this property to report the certificate chain used for server certificate. Server Certificate Chain Select is set by loading a Trust Configuration File.
The device uses this property to report a list of available access points. The access points are in a list of tags starting with 0xA0 and incrementing. The list can contain up to 20 access points. Each access point contains two tags. Tag 0x80 contains the access point’s SSID. The SSID is a text string of 1 to 32 characters. Tag 0x81 is the RSSI for the access point. The RSSI is a signed binary number between -30 and -90.