0x1F05 - Erase All Bluetooth LE Bonds (Bluetooth LE Only)
The host can use this command to erase all Bluetooth® LE bonds. The user should then forget the device and re-pair the device on any host that it was previously paired with if that host needs to communicate with the device again.
The sequence of events is as follows:
1
Construct the command request
The host constructs the command request for Command 0x1F01 - Reset Device in the format below.
2
Send the command
The host sends the command request to the device.
3
The device sends a response in the format below to the host.
4
The device erases all Bluetooth® LE bonds within around 500ms.
Tag
Len
Value / Description
Typ
Req
Default
Tag
Len
Value / Description
Typ
Req
Default
1F05 = Erase All Bluetooth® LE Bonds - Command 0x1F05
No parameters.
End of any wrappers, at minimum including Request Message
1F05 = Erase All Bluetooth LE Bonds - Command 0x1F05
No parameters.
End of any wrappers, at minimum including Response Message
Beginning of any wrappers, at minimum including Request Message
Beginning of any wrappers, at minimum including Response Message
Device responds
Device erases bonds
Erase All Bluetooth® LE Bonds - Request Data for Command 0x1F05
Erase All Bluetooth LE Bonds - Response Data for Command 0x1F05