1.2.1.nnn - Transaction Settings - A

Device-Driven Fallback Behavior (MSR Only) - Property 1.2.1.1.1.1

Property Description

Property OID

1.2.1.1.1.1 / 0x010201010101

Name

Device-Driven Fallback Behavior

0x00 –Card Preference.

The device automatically chooses the application that is mutually supported by the card and the terminal, based on the priority order specified by the card. This is the default and is standard EMV transaction flow behavior.

0x01 – Reserved 0x02 – Reserved

0x03 – Enhanced Prompt Cardholder.

The device sends the host Notification 0x1803 – 02 02 00 00 (Display Cardholder, Data Attached, Reserved) to request that the cardholder select from a list of available applications. Each application may include additional tags such as - priority indicator, Issuer Country Code and Issuer Identification Number. After the cardholder selects an application, the host passes the selection to the device using Command 0x1802 - Report Cardholder Selection to device to return the cardholder’s selection to the device.

Default

0x00 – Card Preference

Valid Values

0x00 – 0x03

Valid Values

0x00 = Device-driven Signature Capture 0x01 = Host-driven Signature Capture

Valid Values

0x00 = Include signature data in EMV Batch Data Type

0x01 = RESERVED. Make signature data available as file. Use Command 0xD821 - Start Get File from Device to request file type Signature Capture File to retrieve the data as a Signature Capture File Type.

Valid Values

0x00 = No Wait Time. If the device uses this setting, the host must wait at least one second after receiving Notification 0x0105 - Transaction Operation Complete before performing any other operations.

0x01..0xFF = Wait the Specified Number of Seconds

Default

0x01 (second)

Valid Values

0x00 = Disable 0x01 = Enable

Default

0x00 - Disabled

Default

49454D4B 41455242 214E4143 554F5946

Default

00000000 00000000 00000000 00000000

Default

00000000 00000000 00000000 00000000

Default

00000000 00000000 00000000 00000000

The device uses this property to determine whether it should automatically implement payment brand fallback rules without host intervention when running Command 0x1001 - Start Transaction.

0x00 = No device-driven fallback 0x01 = Device-driven fallback enabled

AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04

E1 02 C1 00

AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E1 07 E1 05 E1 03 C1 01 01

AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05

E1 03 C1 01 01

AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E1 07 E1 05 E1 03 C1 01 01

Property Description

1.2.1.1.1.2 / 0x010201010102

Application Selection Behavior

The device uses this property to set the device’s application selection behavior for payment brand selection.

AA00 8104 0155D101 840F D101 8501 01 8704 02010101 8902 C200

AA 00 81 04 82 55 D1 01 82 04 00 00 00 00 84 82 00 10 D1 01 85 01 01 87 04 02 01 01 01 89 03 C2

01 00

AA00 81040155D111 8410 D111 850101 870402010101 8903 C20103

AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 10 D1 11 85 01 01 87 04 02 01 01 01 89 03 C2

01 03

Property Description

1.2.1.1.1.3 / 0x010201010103

Device-Driven MSR Fallback Retry Control

For MSR Fallback case, the device uses this property to configure up to 3 retries before falling back to MSR

AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E1 02 C3 00

AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C3 01 00

AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C3 01 03

AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C3 01 03

Property Description

1.2.1.1.2.1 / 0x010201010201

Signature Capture Control

The host can use this property to change whether the device automatically prompts the cardholder for a signature when running Command 0x1001 - Start Transaction, or leaves the triggering of signature capture prompts to the host.

AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04

E2 02 C1 00

AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E1 07 E1 05 E2 03 C1 01 01

AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05

E2 03 C1 01 01

AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E1 07 E1 05 E2 03 C1 01 01

Property Description

1.2.1.1.2.2 / 0x010201010202

Include Signature Data in EMV Batch Data

The device uses this property to determine whether to include signature capture coordinate data in TLV data object DFDF3E when it returns EMV Batch Data Type while running Command 0x1001 - Start Transaction.

AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04

E2 02 C2 00

AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E1 07 E1 05 E2 03 C2 01 01

AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05

E2 03 C2 01 01

AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E1 07 E1 05 E2 03 C2 01 01

Property Description

1.2.1.1.2.3 / 0x010201010203

Signature Timing Window

The device uses this property to determine how long to wait, in seconds, for Command 0x1801 - Request Cardholder Signature while running Command 0x1001 - Start Transaction.

AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04

E2 02 C3 00

AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E1 07 E1 05 E2 03 C3 01 03

AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05

E2 03 C3 01 01

AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E1 07 E1 05 E2 03 C3 01 01

Property Description

1.2.1.1.3.1 / 0x0102010100301

Contactless Low Power Card Detect

The device uses this property to enable/disable contactless low power card detect (Proximity Detection Mode). When disabled, device will read a contactless card as soon as the card is detected. If enabled, device will track and delay reading a contactless card, allowing user to use Contact or MSR card slots.

AA 00 81 04 01 55 D1 01 84 0F D1 01 85 01 01 87 04 02 01 01 03 89 02 C1 00

AA 00 81 04 82 55 D1 01 82 04 00 00 00 00 84 82 00 10 D1 01 85 01 01 87 04 02 01 01 03 89 03 C1

01 00

AA 00 81 04 01 55 D1 11 84 10 D1 11 85 01 01 87 04 02 01 01 03 89 03 C1 01 00

AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 10 D1 11 85 01 01 87 04 02 01 01 03 89 03 C1

01 00

Property Description

1.2.1.1.4.1 / 0x0102010100401

MIFARE Ultralight C 2keys3DES

The device uses this property to set 16-byte of the 2keys 3DES for MIFARE Ultralight C authentication.

On an example of Key1 = 0001020304050607h and Key2 = 08090A0B0C0D0E0Fh, the setting should be 000102030405060708090A0B0C0D0E0F

For security, the Get request for this property will always return 3-MSB of KCV. This key will be encrypted and stored in KPM.

AA 00 81 04 01 06 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04

E4 02 C1 00

AA 00 81 04 82 06 D1 01 82 04 00 00 00 00 84 82 00 1D D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0D E2 0B E1 09 E1 07 E4 05 C1 03 29 07 96

AA 00 81 04 01 55 D1 11 84 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C1 10 00 01 02 03 04 05 06

07 08 09 0A 0B 0C 0D 0E 0F

AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C1

10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

Property Description

1.2.1.1.4.2 / 0x0102010100402

MIFARE Ultralight AES DataProtKey.

The device uses this property to set 16-byte of the AES_DataProtKey for MIFARE Ultralight AES authentication.

On an example of ASE Key = 000102030405060708090A0B0C0D0E0Fh, the setting should be 000102030405060708090A0B0C0D0E0F

For security, the Get request for this property will always return 4-MSB of KCV. This key will be encrypted and stored in KPM.

AA 00 81 04 01 06 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04

E4 02 C2 00

AA00810482D3D1018204000000008482001ED10181072B06010401F609850101890EE20CE10AE10 8E406C204763CBCDE

AA 00 81 04 01 55 D1 11 84 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C2 10 00 01 02 03 04 05 06

07 08 09 0A 0B 0C 0D 0E 0F

AA00810482E5D1118204000000008482002AD11181072B06010401F609850101891AE218E116E11 4E412C210000102030405060708090A0B0C0D0E0F

Property Description

1.2.1.1.4.3 / 0x0102010100403

MIFARE Ultralight AES UIDRetrKey.

The device uses this property to set 16-byte of the AES UIDRetrKey for MIFARE Ultralight AES authentication.

On an example of the ASE Key = 000102030405060708090A0B0C0D0E0Fh, the setting should be 000102030405060708090A0B0C0D0E0F

For security, the Get request for this property will always return 4-MSB of KCV. This key will be encrypted and stored in KPM.

AA 00 81 04 01 06 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04

E4 02 C3 00

AA00810482D3D1018204000000008482001ED10181072B06010401F609850101890EE20CE10AE10 8E406C304B548CFB4

AA 00 81 04 01 55 D1 11 84 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C3 10 00 01 02 03 04 05 06

07 08 09 0A 0B 0C 0D 0E 0F

AA00810482E5D1118204000000008482002AD11181072B06010401F609850101891AE218E116E11 4E412C310000102030405060708090A0B0C0D0E0F

Property Description

1.2.1.1.4.4 / 0x0102010100404

MIFARE Ultralight AES OriginalityKey.

The device uses this property to set 16-byte of the AES OriginalityKey for MIFARE Ultralight AES.

On an example of the ASE Key = 000102030405060708090A0B0C0D0E0Fh, the setting should be 000102030405060708090A0B0C0D0E0F

For security, the Get request for this property will always return 4-MSB of KCV. This key will be encrypted and stored in KPM.

AA 00 81 04 01 06 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04

E4 02 C4 00

AA00810482D3D1018204000000008482001ED10181072B06010401F609850101890EE20CE10AE10 8E406C404763CBCDE

AA 00 81 04 01 55 D1 11 84 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C4 10 00 01 02 03 04 05 06

07 08 09 0A 0B 0C 0D 0E 0F

AA00810482E5D1118204000000008482002AD11181072B06010401F609850101891AE218E116E11 4E412C410000102030405060708090A0B0C0D0E0F

Get Request Example - Property 1.2.1.1.1.1

Get Response Example - Property 1.2.1.1.1.1

Set Request Example - Property 1.2.1.1.1.1

Set Response Example - Property 1.2.1.1.1.1

Application Selection Behavior (Contactless Only) - Property 1.2.1.1.1.2

Get Request Example - Property 1.2.1.1.1.2

Get Response Example - Property 1.2.1.1.1.2

Set Request Example - Property 1.2.1.1.1.2

Set Response Example - Property 1.2.1.1.1.2

Device-Driven MSR Fallback Retry Control (MSR Only) - Property 1.2.1.1.1.3

Get Request Example - Property 1.2.1.1.1.3

Get Response Example - Property 1.2.1.1.1.3

Set Request Example - Property 1.2.1.1.1.3

Set Response Example - Property 1.2.1.1.1.3

Signature Capture Control - Property 1.2.1.1.2.1

Get Request Example - Property 1.2.1.1.2.1

Get Response Example - Property 1.2.1.1.2.1

Set Response Example - Property 1.2.1.1.2.1

Include Signature Data in EMV Batch Data (Touch Only) - Property 1.2.1.1.2.2

Include Signature Data in EMV Batch Data (Touch Only) - Get Request Example

Include Signature Data in EMV Batch Data (Touch Only) - Get Response Example

Include Signature Data in EMV Batch Data (Touch Only) - Set Request Example

Include Signature Data in EMV Batch Data (Touch Only) - Set Response Example

Signature Timing Window (Touch Only) - Property 1.2.1.1.2.3

Signature Timing Window (Touch Only) - Get Request Example

Signature Timing Window (Touch Only) - Get Response Example

Table Signature Timing Window (Touch Only) - Set Request Example

Signature Timing Window (Touch Only) - Set Response Example

Contactless Low Power Card Detect (Contactless Only) - Property 1.2.1.1.3.1

Contactless Low Power Card Detect (Contactless Only) - Get Request Example

Contactless Low Power Card Detect (Contactless Only) - Get Response Example

Contactless Low Power Card Detect (Contactless Only) - Set Request Example

Contactless Low Power Card Detect (Contactless Only) - Set Response Example

MIFARE Ultralight C 2keys3DES - Property 1.2.1.1.4.1

MIFARE Ultralight C 2keys3DES - Get Request Example

MIFARE Ultralight C 2keys3DES - Get Response Example

MIFARE Ultralight C 2keys3DES - Set Request Example

MIFARE Ultralight C 2keys3DES - Set Response Example

MIFARE Ultralight AES DataProtKey. - Property 1.2.1.1.4.2

MIFARE Ultralight AES DataProtKey. - Get Request Example

MIFARE Ultralight AES DataProtKey. - Get Response Example

MIFARE Ultralight AES DataProtKey. - Set Request Example

MIFARE Ultralight AES DataProtKey. - Set Response Example

MIFARE Ultralight AES UIDRetrKey. - Property 1.2.1.1.4.3

MIFARE Ultralight AES UIDRetrKey. - Get Request Example

MIFARE Ultralight AES UIDRetrKey. - Get Response Example

MIFARE Ultralight AES UIDRetrKey. - Set Request Example

MIFARE Ultralight AES UIDRetrKey. - Set Response Example

MIFARE Ultralight AES OriginalityKey. - Property 1.2.1.1.4.4

MIFARE Ultralight AES OriginalityKey. - Get Request Example

MIFARE Ultralight AES OriginalityKey. - Get Response Example

MIFARE Ultralight AES OriginalityKey. - Set Request Example

MIFARE Ultralight AES OriginalityKey. - Set Response Example

Note that if the device is configured to use this option, the cardholder must hold the card or contactless payment device in contact with the device for until cardholder application selection is complete, otherwise the device will report the transaction failed. For this reason, MagTek does not recommend using this setting.