0x1102 - Pass Through Command for MIFARE DESFire, Type 4
After a MIFARE DESFire Light/EV1/EV2/EV3 Tag is activated, the host uses this command to send commands and receive responses to and from a MIFARE DESFire Tag.
There will be a fixed 30 second timeout for commands that require multiple command/responses.
Timeout: 30 seconds for commands that require multiple command/responses.
Request Data for Pass Through Command for MIFARE DESFire, Type 4 - Command 0x1102
Tag
Len
Value / Description
Typ
Req
Default
Tag
Len
Value / Description
Typ
Req
Default
If the request started successfully, the Request Status in the message wrapper is: OK, Started / Running, All good / requested operation was successful.
Tag
Len
Value / Description
Typ
Req
Default
Tag
Len
Value / Description
Typ
Req
Default
81
var
Command to Send. See DESFire Data Sheet (MF2DLHX0). Should follow ISO 7816-4 APDU format:
C-APDU
CLA INS P1 P2 Lc Data Le
B
R
82
01
00 – No Encrypt 01 - Encrypt
83
01
00 – Expect More Commands 01 – FF (Last Command). If last command, Device will provide a single beep after receiving a successful response from tag; otherwise, device will provide a double beep.
B
R
End of any wrappers, at minimum including Request Message
1102
Pass Through Command for MIFARE DESFire, Type 4 - Command 0x1102
81
02
Tag Response (SW1 SW2). See DESFire Data Sheet (MF2DLHX0). Should follow ISO 7816-4 APDU format:
SW1 and SW2 of R-APDU
If card is not able to respond:
SW1 = 0x64, SW2 = 0x00
B
R
N/A
82
var
Tag Data:
Data of R-APDU
Encryption Control: If encrypted, see Payload for Encrypted NFC/MIFARE Data. If unencrypted, seeUnencrypted NFC/MIFARE Data.
B
O
N/A
End of any wrappers, at minimum including Response Message
/DFDF50
var
Encrypted Data KSN
B
R
/DFDF51
01
Encrypted Data Encryption Type. See Encryption Type for a list of valid values.
B
R
End of Notification Message
/DF7A
var
NFC/MIFARE Data
B
O
Beginning of any wrappers, at minimum including Request Message
1102
Command 0x1102 - Pass Through Command for MIFARE DESFire, Type 4
Beginning of any wrappers, at minimum including Response Message
/DFDF59
var
Encrypted Data Primitive. Decrypt the value of this TLV data object using the algorithm and variant specified in the Encrypted Data KSN parameter and the Encrypted Data Encryption Type parameter to read its contents. The format of the decrypted data is shown in the below table
B
FC
var
NFC/MIFARE Data Container
T
Response Data for Command Pass Through Command for MIFARE DESFire, Type 4 - 0x1102