> For the complete documentation index, see [llms.txt](https://developer.magtek.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://developer.magtek.com/api-and-command-reference/~/revisions/pO1LOROzEbhazZpeone0/dynafamily-programmers-manual/commands/0x1fnn-device-control.md).

# 0x1Fnn - Device Control

## Device Control

This section of the DynaFamily Programmer's Manual lists available Device Control commands to initiate various functions in the device.

{% hint style="success" %}
Applies to: All Dyna Family products
{% endhint %}

### Information in this group

| **Section**                                                                                                                                                                                                                                                              | **Information**                                                                                                                                                        |
| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| [<mark style="color:red;">**0x1F01 - Reset Device**</mark>](/api-and-command-reference/~/revisions/pO1LOROzEbhazZpeone0/dynafamily-programmers-manual/commands/0x1fnn-device-control/0x1f01-reset-device.md)                                                             | The host uses this command to reset the device.                                                                                                                        |
| [<mark style="color:red;">**0x1F02 - et Notification Subscriptions**</mark>](/api-and-command-reference/~/revisions/pO1LOROzEbhazZpeone0/dynafamily-programmers-manual/commands/0x1fnn-device-control/0x1f02-set-notification-subscriptions.md)                          | The host uses this command to specify which notifications the device should send on each of its available interfaces.                                                  |
| [<mark style="color:red;">**0x1F03 - Extend Session (Session Managements Only)**</mark>](/api-and-command-reference/~/revisions/pO1LOROzEbhazZpeone0/dynafamily-programmers-manual/commands/0x1fnn-device-control/0x1f03-extend-session-session-management-only.md)      | The host can use this command to extend a session for open protocol interfaces, such as the WLAN interface, which require session management to meet PCI requirements. |
| [<mark style="color:red;">**0x1F04 - Terminate Bluetooth LE Connection**</mark>](/api-and-command-reference/~/revisions/pO1LOROzEbhazZpeone0/dynafamily-programmers-manual/commands/0x1fnn-device-control/0x1f04-terminate-bluetooth-le-connection-bluetooth-le-only.md) | The host can use this command to terminate a Bluetooth LE connection.                                                                                                  |
| [<mark style="color:red;">**0x1F05 - Erase All Bluetooth LE Bonds**</mark>](/api-and-command-reference/~/revisions/pO1LOROzEbhazZpeone0/dynafamily-programmers-manual/commands/0x1fnn-device-control/0x1f05-erase-all-bluetooth-le-bonds-bluetooth-le-only.md)           | The host can use this command to erase all Bluetooth® LE bonds.                                                                                                        |

### Need More Help

{% hint style="info" %}
**Need Help?**

For additional support, please contact MagTek Support:

**Technical Support:**

* 📧 **Email:** [support@magtek.com](mailto:support@magtek.com?subject=Support%20Request)
* 📞 **Phone:** 1-562-546-6800 (US)
* 🕐 **Hours:** Monday-Friday, 5:30 AM - 5:00 PM PST

**Online Resources:**

* 🌐 **Support Portal:** developer.magtek.com

**Documentation Feedback:**

Help us improve this documentation! [feedback@magtek.com](mailto:feedback@magtek.com?subject=Feedback)
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://developer.magtek.com/api-and-command-reference/~/revisions/pO1LOROzEbhazZpeone0/dynafamily-programmers-manual/commands/0x1fnn-device-control.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.