Transaction Settings - Property Subgroup 1.2.1.nnn - A

Device-Driven Fallback Behavior (MSR Only) - Property 1.2.1.1.1.1

Property Description
Property OID	1.2.1.1.1.1 / 0x010201010101
Name	Device-Driven Fallback Behavior
Description	The device uses this property to determine whether it should automatically implement payment brand fallback rules without host intervention when running Command 0x1001 - Start Transaction.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = No device-driven fallback 0x01 = Device-driven fallback enabled
Default	0x01

Get Request Example - Property 1.2.1.1.1.1

Example (Hex)
AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E1 02 C1 00

Get Response Example - Property 1.2.1.1.1.1

Example (Hex)
AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C1 01 01

Set Request Example - Property 1.2.1.1.1.1

Example (Hex)
AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C1 01 01

Set Response Example - Property 1.2.1.1.1.1

Example (Hex)
AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C1 01 01

Application Selection Behavior (Contactless Only) - Property 1.2.1.1.1.2

Property Description
Property OID	1.2.1.1.1.2 / 0x010201010102
Name	Application Selection Behavior
Description	The device uses this property to set the device’s application selection behavior for payment brand selection.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 –Card Preference. The device automatically chooses the application that is mutually supported by the card and the terminal, based on the priority order specified by the card. This is the default and is standard EMV transaction flow behavior. 0x01 – Reserved 0x02 – Reserved 0x03 – Enhanced Prompt Cardholder. The device sends the host Notification 0x1803 – 02 02 00 00 (Display Cardholder, Data Attached, Reserved) to request that the cardholder select from a list of available applications. Each application may include additional tags such as - priority indicator, Issuer Country Code and Issuer Identification Number. After the cardholder selects an application, the host passes the selection to the device using Command 0x1802 - Report Cardholder Selection to device to return the cardholder’s selection to the device. Note that if the device is configured to use this option, the cardholder must hold the card or contactless payment device in contact with the device for until cardholder application selection is complete, otherwise the device will report the transaction failed. For this reason, MagTek does not recommend using this setting.
Default	0x00 – Card Preference

Get Request Example - Property 1.2.1.1.1.2

Example (Hex)
AA00 8104 0155D101 840F D101 8501 01 8704 02010101 8902 C200

Get Response Example - Property 1.2.1.1.1.2

Example (Hex)
AA 00 81 04 82 55 D1 01 82 04 00 00 00 00 84 82 00 10 D1 01 85 01 01 87 04 02 01 01 01 89 03 C2 01 00

Set Request Example - Property 1.2.1.1.1.2

Example (Hex)
AA00 81040155D111 8410 D111 850101 870402010101 8903 C20103

Set Response Example - Property 1.2.1.1.1.2

Example (Hex)
AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 10 D1 11 85 01 01 87 04 02 01 01 01 89 03 C2 01 03

Device-Driven MSR Fallback Retry Control (MSR Only) - Property 1.2.1.1.1.3

Property Description
Property OID	1.2.1.1.1.3 / 0x010201010103
Name	Device-Driven MSR Fallback Retry Control
Description	For MSR Fallback case, the device uses this property to configure up to 3 retries before falling back to MSR
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 – 0x03
Default	0x00

Get Request Example - Property 1.2.1.1.1.3

Example (Hex)
AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E1 02 C3 00

Get Response Example - Property 1.2.1.1.1.3

Example (Hex)
AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C3 01 00

Set Request Example - Property 1.2.1.1.1.3

Example (Hex)
AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C3 01 03

Set Response Example - Property 1.2.1.1.1.3

Example (Hex)
AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E1 03 C3 01 03

Signature Capture Control - Property 1.2.1.1.2.1

Property Description
Property OID	1.2.1.1.2.1 / 0x010201010201
Name	Signature Capture Control
Description	The host can use this property to change whether the device automatically prompts the cardholder for a signature when running Command 0x1001 - Start Transaction, or leaves the triggering of signature capture prompts to the host.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = Device-driven Signature Capture 0x01 = Host-driven Signature Capture
Default	0x00

Get Request Example - Property 1.2.1.1.2.1

Example (Hex)
AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E2 02 C1 00

Get Response Example - Property 1.2.1.1.2.1

Example (Hex)
AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C1 01 01

Example (Hex)
AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C1 01 01

Set Response Example - Property 1.2.1.1.2.1

Example (Hex)
AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C1 01 01

Include Signature Data in EMV Batch Data (Touch Only) - Property 1.2.1.1.2.2

Property Description
Property OID	1.2.1.1.2.2 / 0x010201010202
Name	Include Signature Data in EMV Batch Data
Description	The device uses this property to determine whether to include signature capture coordinate data in TLV data object DFDF3E when it returns EMV Batch Data Type while running Command 0x1001 - Start Transaction.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = Include signature data in EMV Batch Data Type 0x01 = RESERVED. Make signature data available as file. Use Command 0xD821 - Start Get File from Device to request file type Signature Capture File to retrieve the data as a Signature Capture File Type.
Default	0x00

Include Signature Data in EMV Batch Data (Touch Only) - Get Request Example

Example (Hex)
AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E2 02 C2 00

Include Signature Data in EMV Batch Data (Touch Only) - Get Response Example

Example (Hex)
AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C2 01 01

Include Signature Data in EMV Batch Data (Touch Only) - Set Request Example

Example (Hex)
AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C2 01 01

Include Signature Data in EMV Batch Data (Touch Only) - Set Response Example

Example (Hex)
AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C2 01 01

Signature Timing Window (Touch Only) - Property 1.2.1.1.2.3

Property Description
Property OID	1.2.1.1.2.3 / 0x010201010203
Name	Signature Timing Window
Description	The device uses this property to determine how long to wait, in seconds, for Command 0x1801 - Request Cardholder Signature while running Command 0x1001 - Start Transaction.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = No Wait Time. If the device uses this setting, the host must wait at least one second after receiving Notification 0x0105 - Transaction Operation Complete before performing any other operations. 0x01..0xFF = Wait the Specified Number of Seconds
Default	0x01 (second)

Signature Timing Window (Touch Only) - Get Request Example

Example (Hex)
AA 00 81 04 01 04 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E2 02 C3 00

Signature Timing Window (Touch Only) - Get Response Example

Example (Hex)
AA 00 81 04 82 04 D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C3 01 03

Table Signature Timing Window (Touch Only) - Set Request Example

Example (Hex)
AA 00 81 04 01 02 D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C3 01 01

Signature Timing Window (Touch Only) - Set Response Example

Example (Hex)
AA 00 81 04 82 02 D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E1 07 E1 05 E2 03 C3 01 01

Contactless Low Power Card Detect (Contactless Only) - Property 1.2.1.1.3.1

Property Description
Property OID	1.2.1.1.3.1 / 0x0102010100301
Name	Contactless Low Power Card Detect
Description	The device uses this property to enable/disable contactless low power card detect (Proximity Detection Mode). When disabled, device will read a contactless card as soon as the card is detected. If enabled, device will track and delay reading a contactless card, allowing user to use Contact or MSR card slots.
Securing Key	None
Min. Len (b)	1
Max. Len (b)	1
Data Type	Binary
Valid Values	0x00 = Disable 0x01 = Enable
Default	0x00 - Disabled

Contactless Low Power Card Detect (Contactless Only) - Get Request Example

Example (Hex)
AA 00 81 04 01 55 D1 01 84 0F D1 01 85 01 01 87 04 02 01 01 03 89 02 C1 00

Contactless Low Power Card Detect (Contactless Only) - Get Response Example

Example (Hex)
AA 00 81 04 82 55 D1 01 82 04 00 00 00 00 84 82 00 10 D1 01 85 01 01 87 04 02 01 01 03 89 03 C1 01 00

Contactless Low Power Card Detect (Contactless Only) - Set Request Example

Example (Hex)
AA 00 81 04 01 55 D1 11 84 10 D1 11 85 01 01 87 04 02 01 01 03 89 03 C1 01 00

Contactless Low Power Card Detect (Contactless Only) - Set Response Example

Example (Hex)
AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 10 D1 11 85 01 01 87 04 02 01 01 03 89 03 C1 01 00

MIFARE Ultralight C 2keys3DES - Property 1.2.1.1.4.1

Property Description
Property OID	1.2.1.1.4.1 / 0x0102010100401
Name	MIFARE Ultralight C 2keys3DES
Description	The device uses this property to set 16-byte of the 2keys 3DES for MIFARE Ultralight C authentication. On an example of Key1 = 0001020304050607h and Key2 = 08090A0B0C0D0E0Fh, the setting should be 000102030405060708090A0B0C0D0E0F For security, the Get request for this property will always return 3-MSB of KCV. This key will be encrypted and stored in KPM.
Securing Key	None
Min. Len (b)	16
Max. Len (b)	16
Data Type	Binary
Valid Values
Default	49454D4B 41455242 214E4143 554F5946

MIFARE Ultralight C 2keys3DES - Get Request Example

Example (Hex)
AA 00 81 04 01 06 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E4 02 C1 00

MIFARE Ultralight C 2keys3DES - Get Response Example

Example (Hex)
AA 00 81 04 82 06 D1 01 82 04 00 00 00 00 84 82 00 1D D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0D E2 0B E1 09 E1 07 E4 05 C1 03 29 07 96

MIFARE Ultralight C 2keys3DES - Set Request Example

Example (Hex)
AA 00 81 04 01 55 D1 11 84 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C1 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

MIFARE Ultralight C 2keys3DES - Set Response Example

Example (Hex)
AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C1 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

MIFARE Ultralight AES DataProtKey. - Property 1.2.1.1.4.2

Property Description
Property OID	1.2.1.1.4.2 / 0x0102010100402
Name	MIFARE Ultralight AES DataProtKey.
Description	The device uses this property to set 16-byte of the AES_DataProtKey for MIFARE Ultralight AES authentication. On an example of ASE Key = 000102030405060708090A0B0C0D0E0Fh, the setting should be 000102030405060708090A0B0C0D0E0F For security, the Get request for this property will always return 4-MSB of KCV. This key will be encrypted and stored in KPM.
Securing Key	None
Min. Len (b)	16
Max. Len (b)	16
Data Type	Binary
Valid Values
Default	00000000 00000000 00000000 00000000

MIFARE Ultralight AES DataProtKey. - Get Request Example

Example (Hex)
AA 00 81 04 01 06 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E4 02 C2 00

MIFARE Ultralight AES DataProtKey. - Get Response Example

Example (Hex)
AA00810482D3D1018204000000008482001ED10181072B06010401F609850101890EE20CE10AE10 8E406C204763CBCDE

MIFARE Ultralight AES DataProtKey. - Set Request Example

Example (Hex)
AA 00 81 04 01 55 D1 11 84 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C2 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

MIFARE Ultralight AES DataProtKey. - Set Response Example

Example (Hex)
AA00810482E5D1118204000000008482002AD11181072B06010401F609850101891AE218E116E11 4E412C210000102030405060708090A0B0C0D0E0F

MIFARE Ultralight AES UIDRetrKey. - Property 1.2.1.1.4.3

Property Description
Property OID	1.2.1.1.4.3 / 0x0102010100403
Name	MIFARE Ultralight AES UIDRetrKey.
Description	The device uses this property to set 16-byte of the AES UIDRetrKey for MIFARE Ultralight AES authentication. On an example of the ASE Key = 000102030405060708090A0B0C0D0E0Fh, the setting should be 000102030405060708090A0B0C0D0E0F For security, the Get request for this property will always return 4-MSB of KCV. This key will be encrypted and stored in KPM.
Securing Key	None
Min. Len (b)	16
Max. Len (b)	16
Data Type	Binary
Valid Values
Default	00000000 00000000 00000000 00000000

MIFARE Ultralight AES UIDRetrKey. - Get Request Example

Example (Hex)
AA 00 81 04 01 06 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E4 02 C3 00

MIFARE Ultralight AES UIDRetrKey. - Get Response Example

Example (Hex)
AA00810482D3D1018204000000008482001ED10181072B06010401F609850101890EE20CE10AE10 8E406C304B548CFB4

MIFARE Ultralight AES UIDRetrKey. - Set Request Example

Example (Hex)
AA 00 81 04 01 55 D1 11 84 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C3 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

MIFARE Ultralight AES UIDRetrKey. - Set Response Example

Example (Hex)
AA00810482E5D1118204000000008482002AD11181072B06010401F609850101891AE218E116E11 4E412C310000102030405060708090A0B0C0D0E0F

MIFARE Ultralight AES OriginalityKey. - Property 1.2.1.1.4.4

Property Description
Property OID	1.2.1.1.4.4 / 0x0102010100404
Name	MIFARE Ultralight AES OriginalityKey.
Description	The device uses this property to set 16-byte of the AES OriginalityKey for MIFARE Ultralight AES. On an example of the ASE Key = 000102030405060708090A0B0C0D0E0Fh, the setting should be 000102030405060708090A0B0C0D0E0F For security, the Get request for this property will always return 4-MSB of KCV. This key will be encrypted and stored in KPM.
Securing Key	None
Min. Len (b)	16
Max. Len (b)	16
Data Type	Binary
Valid Values
Default	00000000 00000000 00000000 00000000

MIFARE Ultralight AES OriginalityKey. - Get Request Example

Example (Hex)
AA 00 81 04 01 06 D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E1 06 E1 04 E4 02 C4 00

MIFARE Ultralight AES OriginalityKey. - Get Response Example

Example (Hex)
AA00810482D3D1018204000000008482001ED10181072B06010401F609850101890EE20CE10AE10 8E406C404763CBCDE

MIFARE Ultralight AES OriginalityKey. - Set Request Example

Example (Hex)
AA 00 81 04 01 55 D1 11 84 1F D1 11 85 01 01 87 04 02 01 01 04 89 12 C4 10 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

MIFARE Ultralight AES OriginalityKey. - Set Response Example

Example (Hex)
AA00810482E5D1118204000000008482002AD11181072B06010401F609850101891AE218E116E11 4E412C410000102030405060708090A0B0C0D0E0F