> For the complete documentation index, see [llms.txt](https://developer.magtek.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://developer.magtek.com/api-and-command-reference/scra-dynafamily-programmers-manual/data-types-and-shared-tlv-data-objects/display-strings.md).

# Display Strings

The Display Strings type provides a pre-defined set of messages by string ID that the host and device use for various user interface features.

## Table DST-1 - Display String IDs and Strings

| Display String ID | Display String (en-US)               |
| ----------------- | ------------------------------------ |
| 0x00              | Reserved, do not use.                |
| 0x01              | “AMOUNT”                             |
| 0x02              | “AMOUNT OK?”                         |
| 0x03              | “APPROVED”                           |
| 0x04              | “CALL YOUR BANK”                     |
| 0x05              | “CANCEL OR ENTER”                    |
| 0x06              | “CARD ERROR”                         |
| 0x07              | “DECLINED”                           |
| 0x08              | “ENTER AMOUNT”                       |
| 0x09              | Reserved, do not use.                |
| 0x0A              | Reserved, do not use.                |
| 0x0B              | “INSERT CARD”                        |
| 0x0C              | “NOT ACCEPTED”                       |
| 0x0D              | Reserved, do not use.                |
| 0x0E              | “PLEASE WAIT”                        |
| 0x0F              | “PROCESSING ERROR”                   |
| 0x10              | “REMOVE CARD”                        |
| 0x11              | “USE CHIP READER”                    |
| 0x12              | “USE MAGSTRIPE”                      |
| 0x13              | “TRY AGAIN”                          |
| 0x14              | “WELCOME”                            |
| 0x15              | “PRESENT CARD”                       |
| 0x16              | “PROCESSING”                         |
| 0x17              | “CARD READ OK - REMOVE CARD”         |
| 0x18              | “INSERT OR SWIPE CARD”               |
| 0x19              | “PRESENT ONE CARD ONLY”              |
| 0x1A              | “APPROVED PLEASE SIGN”               |
| 0x1B              | “AUTHORIZING PLEASE WAIT”            |
| 0x1C              | “INSERT, SWIPE, OR TRY ANOTHER CARD” |
| 0x1D              | “PLEASE INSERT CARD”                 |
| 0x1E              | Null prompt (empty screen)           |
| 0x1F              | Reserved, do not use.                |
| 0x20              | “SEE PHONE”                          |
| 0x21              | “PRESENT CARD AGAIN”                 |
| 0x22              | “INSERT/SWIPE/TRY OTHER CARD”        |
| 0x23              | “TAP or SWIPE CARD”                  |
| 0x24              | “TAP or INSERT CARD”                 |
| 0x25              | “TAP, INSERT or SWIPE CARD”          |
| 0x26              | “TAP CARD”                           |
| 0x27              | “TIMEOUT”                            |
| 0x28              | “TRANSACTION TERMINATED”             |
| 0x29              | “USE CHIP READER or MAGSTRIPE”       |
| 0x2A              | “SCAN BARCODE”                       |
| 0x2B              | “BARCODE READ SUCCESSFULLY”          |
| 0x2C              | “CANCELED”                           |
| 0x2D              | “SWIPE CARD or SCAN BARCODE”         |
| 0x2E              | “INSERT CARD or SCAN BARCODE”        |
| 0x2F              | “INSERT, SWIPE or SCAN BARCODE”      |
| 0x30              | “TAP CARD or SCAN BARCODE”           |
| 0x31              | “TAP, SWIPE or SCAN BARCODE”         |
| 0x32              | “TAP, INSERT or SCAN BARCODE”        |
| 0x33              | “TAP, INSERT, SWIPE or SCAN BARCODE” |
| 0x34              | “TRY ANOTHER INTERFACE”              |
| 0x35              | “NFC TAG DETECTED”                   |
| 0x36              | “ERROR REMOVE CARD”                  |
| 0x37              | “MIFARE CLASSIC 1K DETECTED”         |
| 0x38              | “MIFARE CLASSIC 4K DETECTED”         |
| 0x39              | “MIFARE DESFIRE DETECTED”            |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://developer.magtek.com/api-and-command-reference/scra-dynafamily-programmers-manual/data-types-and-shared-tlv-data-objects/display-strings.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.