Security - Command Group 0xEnnn

Security

This section of the DynaFamily Programmer's Manual lists available security commands to utilize various functions in the device.

Applies to: All Dyna Family products

Information in this group

Section	Information
Get Challenge	The host uses this command to request challenge data from the device, which the host can then use to perform a specific sensitive operation / modify a specific type of device setting.
Send Secured Command to Device	The host uses this command to transmit another command securely. T
Load Key Using TR-31	The host uses this command to load a key into one of several available slots in the device’s secure memory.
Generate CSR Keys (WLAN Only)	The host uses this command to generate a key pair to be used for a certificate signing request (CSR).
Generate CSR (WLAN Only)	The host uses this command to generate a certificate signing request (CSR) in PEM format.
Change Device Lock State	The host can use this command to change the device’s lock state.
Encrypt User Data	The host uses this command to request that the device encrypt a block of user data embedded in the command string.
Get Key Info	The host uses this command to retrieve information about a key slot, including details about the key stored in that slot.

Need More Help

Need Help?

For additional support, please contact MagTek Support:

Technical Support:

• 📧 Email: [e-mail]

• 📞 Phone: [phone] (US)

• 🕐 Hours: Monday-Friday, 5:30 AM - 5:00 PM PST

Online Resources:

• 🌐 Support Portal: developer.magtek.com

Documentation Feedback:

Help us improve this documentation! [e-mail]