Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.
Export as PDF

1.2.3.nnn - User Interface Settings - A

1.2.3.1.1.1 - Custom Idle Page Image (Display Only)

Property Description

Property OID

1.2.3.1.1.1 / 0x010203010101

Name

Custom Idle Page Image

Description

The device uses this property to set which custom image it displays when idle. If the selected image does not exist, the device falls back to showing text. This property does not take effect instantly; it takes effect the next time the device transitions to idle (for example, after a transaction or after resetting).

· 0x00 = Show text “Welcome”

· 0x01 = Show custom image 1

· 0x02 = Show custom image 2

· 0x03 = Show custom image 3

· 0x04 = Show custom image 4

To use this feature, the host must first load an image into the selected slot using Command 0xD812 - Start Send File to Device (Unsecured). Images must be BMP format, 160KB or smaller with no compression, maximum 320px by 240px, with color depth 16 color, 256 color, 16-bit color, 24-bit color. Images smaller than the maximum size are centered on the display. Note images at full screen size must be 16-bit color or lower to meet the size requirement.

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

Any number

Default

0x00

Get Request Example - Custom Idle Page Image (Display Only)

Example (Hex)

AA 00 81 04 01 5E D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E3 06 E1 04

E1 02 C1 00

Get Response Example - Custom Idle Page Image (Display Only)

Example (Hex)

AA 00 81 04 82 5E D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E1 05 E1 03 C1 01 03

Set Request Example - Custom Idle Page Image (Display Only)

Example (Hex)

AA 00 81 04 01 5D D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05

E1 03 C1 01 03

Set Response Example - Custom Idle Page Image (Display Only)

Example (Hex)

AA 00 81 04 82 5D D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E1 05 E1 03 C1 01 03

1.2.3.1.1.2 - Custom Idle Page Image Device Locked (Display Only)

Property Description

Property OID

1.2.3.1.1.2 / 0x010203010102

Name

Custom Idle Page Image Device Locked

Description

The device uses this property to set which custom image it displays when idle and locked. If the selected image does not exist, the device falls back to showing text. This property does not take effect instantly; it takes effect the next time the device transitions to idle (for example, after a transaction or after resetting). See Device Lock Feature for more information.

· 0x00 = Show text “Welcome” “Device is Locked”

· 0x01 = Show custom image 1

· 0x02 = Show custom image 2

· 0x03 = Show custom image 3

· 0x04 = Show custom image 4

To use this feature, the host must first load an image into the selected slot using Command 0xD812 - Start Send File to Device (Unsecured). Images must be BMP format, 160KB or smaller with no compression, maximum 320px by 240px, with color depth 16 color, 256 color, 16-bit color, 24-bit color. Images smaller than the maximum size are centered on the display. Note images at full screen size must be 16-bit color or lower to meet the size requirement.

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

Any number

Default

0x00

Get Request Example - Custom Idle Page Image Device Locked (Display Only)

Example (Hex)

AA00 8104 0155D101 840F D101 8501 01 8704 02030101 8902 C200

Get Response Example - Custom Idle Page Image Device Locked (Display Only)

Example (Hex)

AA00 81 04 8255D101 82 04 00000000 84 820010 D101 85 01 01 87 04 02030101 89 03 C2 01 00

Set Request Example - Custom Idle Page Image Device Locked (Display Only)

Example (Hex)

AA00 81040155D111 8410 D111 8501 01 8704 02030101 8903 C201 00

Set Response Example - Custom Idle Page Image Device Locked (Display Only)

Example (Hex)

AA00 81 04 8255D111 82 04 00000000 84 820010 D111 85 01 01 87 04 02030101 89 03 C2 01 00

Display Orientation (Display Only) - Property 1.2.3.1.2.1

Property Description

Property OID

1.2.3.1.2.1 / 0x010203010201

Name

Display Orientation

Description

The device uses this property to set the orientation of the display. There are four modes: Landscape with magnetic stripe reader (MSR) on the top, Landscape with MSR on the bottom, Portrait with MSR on the right, and Portrait with MSR on the left. This property does not take effect immediately, it takes effect the next time the device transitions to idle (for example, after a transaction or after power cycle / reset).

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

0x00 = Landscape with MSR on Top 0x01 = Portrait with MSR on Right 0x02 = Portrait with MSR on Left

0x03 = Landscape with MSR on Bottom

Default

0x00

Get Request Example - Display Orientation (Display Only)

Example (Hex)

AA 00 81 04 01 5E D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E3 06 E1 04

E2 02 C1 00

Get Response Example - Display Orientation (Display Only)

Example (Hex)

AA 00 81 04 82 5E D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E1 05 E2 03 C1 01 00

Set Request Example - Display Orientation (Display Only)

Example (Hex)

AA 00 81 04 01 5D D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05

E2 03 C1 01 01

Set Response Example - Display Orientation (Display Only)

Example (Hex)

AA 00 81 04 82 5D D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E1 05 E2 03 C1 01 01

Send UI Notifications Along with Showing Message on the Display (Display Only) - Property 1.2.3.1.2.3

Property Description

Property OID

1.2.3.1.2.3 / 0x010203010203

Name

Send UI notifications along with showing message on the display

Description

This property is used to enable/disable the device to send UI notifications to the Host (similars to non-display device) in addition to showing UI message on the display device.

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

0x00 – Disable UI notification

0x01 – Enable UI notification

Default

0x00

Get Request Example - Send UI Notifications Along with Showing Message on the Display (Display Only)

Get Response Example - Send UI Notifications Along with Showing Message on the Display (Display Only)

Set Request Example - Send UI Notifications Along with Showing Message on the Display (Display Only)

Set Response Example - Send UI Notifications Along with Showing Message on the Display (Display Only)

Enable Card Logos Page at Startup - Property 1.2.3.1.3.1

Property Description

Property OID

1.2.3.1.3.1 / 0x010203010301

Name

Enable Card Logos Page at Startup

Description

Enables a page at startup that displays supported payment type brand logos.

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

0x00 = Disable Logo Page at Startup 0x01 = Enable Logo Page at Startup

Default

0x00

Get Request Example - Enable Card Logos Page at Startup

Example (Hex)

AA 00 81 04 01 5E D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E3 06 E1 04

E3 02 C1 00

Get Response Example - Enable Card Logos Page at Startup

Example (Hex)

AA 00 81 04 82 5E D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E1 05 E3 03 C1 01 00

Set Request Example - Enable Card Logos Page at Startup

Example (Hex)

AA 00 81 04 01 5D D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05

E3 03 C1 01 01

Set Response Example - Enable Card Logos Page at Startup

Example (Hex)

AA 00 81 04 82 5D D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E1 05 E3 03 C1 01 01

Display Card Logo While Authorizing - Property 1.2.3.1.3.2

Property Description

1.2.3.1.3.2 / 0x010203010302

Property OID

Name

Display Card Logo While Authorizing

Description

Enable display of logo for card brand used in transaction

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

0x00 = Disable Logo 0x01 = Enable Logo

Default

0x00

Get Request Example - Display Card Logo While Authorizing

Example (Hex)

AA 00 81 04 01 5E D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E3 06 E1 04

E3 02 C2 00

Get Response Example - Display Card Logo While Authorizing

Example (Hex)

AA 00 81 04 82 5E D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E1 05 E3 03 C2 01 00

Set Request Example - Display Card Logo While Authorizing

Example (Hex)

AA 00 81 04 01 5D D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E1 05

E3 03 C2 01 01

Set Response Example - Display Card Logo While Authorizing

Example (Hex)

AA 00 81 04 82 5D D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E1 05 E3 03 C2 01 01

Display Backlight Intensity (Display Only) - Property 1.2.3.1.2.2

Property Description

Property OID

1.2.3.1.2.2 / 0x010203010202

Name

Display Backlight Intensity

Description

The device uses this property to set the intensity of the display’s backlight, expressed as a percentage range from 1% to 100%.

The backlight setting takes effect immediately after the host changes it.

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

0x01..0x64

Default

0x5A (90%)

Get Request Example - Display Backlight Intensity (Display Only)

Example (Hex)

AA 00 81 04 01 55 D1 01 84 0F D1 01 85 01 01 87 04 02 03 01 02 89 02 C2 00

Get Response Example - Display Backlight Intensity (Display Only)

Example (Hex)

AA 00 81 04 82 55 D1 01 82 04 00 00 00 00 84 82 00 10 D1 01 85 01 01 87 04 02 03 01 02 89 03 C2

01 5A

Set Request Example - Display Backlight Intensity (Display Only)

Example (Hex)

AA 00 81 04 01 55 D1 11 84 10 D1 11 85 01 01 87 04 02 03 01 02 89 03 C2 0164

Set Response Example - Display Backlight Intensity (Display Only)

Example (Hex)

AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 10 D1 11 85 01 01 87 04 02 03 01 02 89 03 C2

01 64

System Volume Control - Property 1.2.3.2.1.1

Property Description

Property OID

1.2.3.2.1.1 / 0x010203020101

Name

System Volume Control

Description

This property sets the output volume for all sounds the device produces after startup, expressed as a percentage range from 0% (no sound) to 100%. The volume setting takes effect immediately after the host changes it.

Note that devices with limited volume control hardware allocate ranges of numbers to represent the same physical volume level (for example, 1..49 = Low, 50..100 = High).

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

0x00..0x64

Default

0x32 (50%)

Get Request Example - System Volume Control

Example (Hex)

AA 00 81 04 01 5E D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0A E2 08 E3 06 E2 04

E1 02 C1 00

Get Response Example - System Volume Control

Example (Hex)

AA 00 81 04 82 5E D1 01 82 04 00 00 00 00 84 82 00 1B D1 01 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E2 05 E1 03 C1 01 32

Set Request Example - System Volume Control

Example (Hex)

AA 00 81 04 01 5D D1 11 84 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01 89 0B E2 09 E3 07 E2 05

E1 03 C1 01 01

Set Response Example - System Volume Control

Example (Hex)

AA 00 81 04 82 5D D1 11 82 04 00 00 00 00 84 82 00 1B D1 11 81 07 2B 06 01 04 01 F6 09 85 01 01

89 0B E2 09 E3 07 E2 05 E1 03 C1 01 01

Touch Keypress Beep Enable - Property 1.2.3.2.2.1

Property Description

Name

Touch Keypress Beep Enable

Property OID

1.2.3.2.2.1 / 0x010203020201

Description

Globally enables/disables the beep tone triggered by touchscreen taps.

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

0x0 - 0x1

Default

0x1

Get Request Example - Touch Keypress Beep Enable

Example (Hex)

AA 00 81 04 01 55 D1 01 84 0F D1 01 85 01 01 87 04 02 03 02 02 89 02 C1 00

Get Response Example - Touch Keypress Beep Enable

Example (Hex)

AA 00 81 04 82 55 D1 01 82 04 00 00 00 00 84 82 00 10 D1 01 85 01 01 87 04 02 03 02 02 89 03 C1

01 01

Set Request Example (enable) - Touch Keypress Beep Enable

Example (Hex)

AA 00 81 04 01 55 D1 11 84 10 D1 11 85 01 01 87 04 02 03 02 02 89 03 C1 01 01

Set Response Example (enable) - Touch Keypress Beep Enable

Example (Hex)

AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 10 D1 11 85 01 01 87 04 02 03 02 02 89 03 C1

01 01

Set Request Example (disable) - Touch Keypress Beep Enable

Example (Hex)

AA 00 81 04 01 55 D1 11 84 10 D1 11 85 01 01 87 04 02 03 02 02 89 03 C1 01 00

Set Response Example (disable) - Touch Keypress Beep Enable

Example (Hex)

AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 10 D1 11 85 01 01 87 04 02 03 02 02 89 03 C1

01 00

Phone Number Format - Property 1.2.3.3.1.1

Property Description

Property OID

1.2.3.3.1.1 / 0x010203030101

Name

Phone Number Format

Description

This property is used to change the displayed format of the phone number entered in the touch screen. It fully supports the International E.164 format that defines the fields allowed for global phone numbers. This property is an array of 7 bytes divided into fields. All values are HEX. Byte 0-1 – Country code (0x0000): 1 – 999 (value range 0x01 – 0x3E7) see NOTE 1 Byte 2 – Number of Area code digits: 0 – 3 (value range 0x00 – 0x03) Byte 3 – Add Area code leading zero: (T/F) 0 – 1 (value range 0x00 – 0x01) NOTE 3

Byte 4 – Number of local number digits: l – 12 (value range 0x01 – 0x0C)

Byte 5 – Local number dash position: 0 – ‘Byte 4’s value minus 1’

Byte 6 – Hide digits with ‘*’: (T/F) 0 – 1 (value range 0x00 – 0x01) NOTE 1: If country code is set to zero, then the local number format is automatically enabled.

NOTE 2: The maximum number of digits specified by the E.164 format is 15. The country code digits + area code digits + local number digits cannot exceed 15 total digits.

NOTE 3: Setting Byte 3 to true only takes effect if country code is set to zero. If Byte 3 is set to true, then Byte 2 must be set to 2 or 3. Reason: Adding a leading zero automatically makes the number of area code digits greater than 1.

Securing Key

None

Min. Len (b)

7

Max. Len (b)

7

Data Type

Binary

Valid Values

Example valid HEX value for the USA

0001 03 00 07 03 00

Default

OID Default

0x0001 = country code (+1) USA 0x03 = num area code digits

0x00 = add area code leading zero (T/F)

0x07 = num local number Digits

0x03 = local number dash position 0x00 = hide digits (T/F)

Get Request Example - Phone Number Format

Example (Hex)

AA00 81040155D101 840F D101 850101 870402030301 8902 C100

Get Response Example - Phone Number Format

Example (Hex)

AA0081048255D11182040000000084820016D1118501018704020303018909C107 00010300070300

Set Request Example - Phone Number Format

United States +1 (321) 689-1234, international number, with 1-digit country code, 3-digit area code

Example (Hex)

AA00 81040155D111 8416 D111 850101 870402030301 8909 C107 0001 03 00 07 03 00

Set Response Example (enable) - Phone Number Format

Example (Hex)

AA0081048255D10182040000000084820016D1018501018704020303018909C107 00010300070300

Set Request Example - Phone Number Format

United States (321) 689-2213, local number, with 3-digit area code, dash in position 3

Example (Hex)

AA00 81040155D111 8416 D111 850101 870402030301 8909C107 0000 03 00 07 03 00

Set Request Example - Phone Number Format

Australia +61 (5) 1234-5678, international number, with 2-digit country code, 1-digit area code

Example (Hex)

AA00 81040155D111 8416 D111 850101 870402030301 8909C107 003D 01 00 08 04 00

Set Request Example - Phone Number Format

Australia (05) 1234-5678, local number, with leading zero, 1-digit area code, dash in position 4

Example (Hex)

AA00 81040155D111 8416 D111 850101 870402030301 8909C107 0000 02 01 08 04 00

Set Request Example - Phone Number Format

Hong Kong +852 12345678, international number, with 3-digit country code, no area code

Example (Hex)

AA00 81040155D111 8416 D111 850101 870402030301 8909C107 0354 00 00 08 00 00

Set Request Example - Phone Number Format

Hong Kong 1234-5678, local number, with no area code, dash in position 4

Example (Hex)

AA00 81040155D111 8416 D111 850101 870402030301 8909C107 0000 00 00 08 04 00

Social Security Number Format - Property 1.2.3.3.2.1

Property Description

Property OID

1.2.3.3.2.1 / 0x010203030201

Name

Social Security Number Format

Description

This property is used to change the displayed format of the social security number entered

in the touch screen. The default obfuscated character is ‘*’.

Byte 0 – Number of digits

Valid values are 4 or 9 (0x04 or 0x09) 4 = Last 4 social security number digits 9 = All 9 social security number digits

Byte 1 – Hide digits with ‘*’ (T/F) 0 – 1 (0x00 – 0x01)

Securing Key

None

Min. Len (b)

2

Max. Len (b)

2

Data Type

Binary

Valid Values

Example valid value for the USA

04 00 – (04 capture 4 digits, 00 show digits)

09 00 – (09 capture 9 digits, 00 show digits)

04 01 – (04 capture 4 digits, 01 hide)

09 01 – (09 capture 9 digits, 01 hide)

Default

09 01 = 9 digits, hide

Get Request Example - Social Security Number Format

Example (Hex)

AA00 81040155D101 840F D101 850101 870402030302 8902 C100

Get Response Example - Social Security Number Format

Example (Hex)

AA0081048255D10182040000000084820011D1018501018704020303028904C1020901

Set Request Example - Social Security Number Format

Example (Hex)

AA00 81040155D111 8411 D111 850101 870402030302 8904 C102 04 01

Set Response Example - Social Security Number Format

Example (Hex)

AA0081048255D11182040000000084820011D1118501018704020303028904C1020401

Zip Code Format - Property 1.2.3.3.3.1

Property Description

Property OID

1.2.3.3.3.1 / 0x010203030301

Name

Zip Code Format

Description

This property is used to format the zip code. Byte 2 is used to control the input type, For example, a numeric zip code 23452 (United states) or an alphanumeric zip code M5V 2T6 (Canada).

Byte 0 – Number of digits: 1 – 9 (value range 0x01 – 0x09)

Byte 1 – Dash position: 0 – ‘Byte 0’s value minus 1’

When set to 0, no dash will appear

Byte 2 – Zip code type: Numeric or Alphanumeric 0 - 1 (value 0x00 – 0x01)

Byte 3 – Hide digits with ‘*’ (T/F) 0 – 1 (value range 0x00 – 0x01)

Securing Key

None

Min. Len (b)

4

Max. Len (b)

4

Data Type

Binary

Valid Values

Example valid HEX value for the USA 09 05 00 00

(capture 9 digits, add dash after digit 5, Numeric Zip code, show digits)

Default

05 00 00 00

Get Request Example - Zip Code Format

Example (Hex)

AA00 81040155D101 840F D101 850101 870402030303 8902 C100

Get Response Example - Zip Code Format

Example (Hex)

AA0081048255D10182040000000084820012D1018501018704020303038905C10309050000

Set Request Example - Zip Code Format

Example (Hex)

AA00 81040155D111 8413 D111 850101 870402030303 8906 C104 09 05 00 00

Set Response Example - Zip Code Format

Example (Hex)

AA0081048255D11182040000000084820012D1118501018704020303038905C10309050000

Birth Date Format - Property 1.2.3.3.4.1

Property Description

Property OID

1.2.3.3.4.1 / 0x010203030401

Name

Birth Date Format

Description

This property is used to determine if the birth date should be displayed on the screen or hidden. The default hidden character is ‘*’.

Byte 0 – Hide digits with ‘*’ (T/F) 0 – 1 (value range 0x00 – 0x01) Byte 1 – Birth date format

0x00 = MM-DD-YYYY

0x01 = DD-MM-YYYY

Securing Key

None

Min. Len (b)

2

Max. Len (b)

2

Data Type

Binary

Valid Values

Example valid HEX value for the USA

00 Show Digits, 01 Hide Digits

Default

00 00

Get Request Example - Birth Date Format

Example (Hex)

AA00 81040155D101 840F D101 850101 870402030304 8902 C100

Get Response Example - Birth Date Format

Example (Hex)

AA0081048255D10182040000000084820010D1018501018704020303048903C10100

Set Request Example - Birth Date Format

Example (Hex)

AA00 81040155D111 8411 D111 850101 870402030304 8904 C102 00 00

Set Response Example - Birth Date Format

Example (Hex)

AA0081048255D11182040000000084820011D1118501018704020303048904C1020000

Personal ID Format - Property 1.2.3.3.5.1

Property OID

1.2.3.3.5.1 / 0x010203030501

Name

Personal ID Format

Description

This property is used to determine if the Employee ID should be displayed on the screen or hidden. The default hidden character is ‘*’.

Byte 0 – Hide characters with ‘*’ (T/F) 0 – 1 (value range 0x00 – 0x01)

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

Example valid HEX value for the USA

00 Show Characters, 01 Hide Characters

Default

00

Get Request Example - Personal ID Format

Example (Hex)

AA00 81040155D101 840F D101 850101 870402030305 8902 C100

Get Response Example - Personal ID Format

Example (Hex)

AA0081048255D10182040000000084820010D1018501018704020303058903C10100

Set Request Example - Personal ID Format

Example (Hex)

AA00 81040155D111 8410 D111 850101 870402030305 8903 C101 01

Set Response Example - Personal ID Format

Example (Hex)

AA0081048255D11182040000000084820010D1118501018704020303058903C10101

Email Format - Property 1.2.3.3.6.1

Property Description

Property OID

1.2.3.3.6.1 / 0x010203030601

Name

Email Format

Description

This property is used to determine if the Email should be displayed on the screen or hidden. The default hidden character is ‘*’. The maximum number of characters for Email is 29

Byte 0 – Hide digits with ‘*’ (T/F) 0 – 1 (value range 0x00 – 0x01)

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

Example valid HEX value for the USA 00 Show Digits, 01 Hide Digits

Default

00

Get Request Example - Email Format

Example (Hex)

AA00 81040155D101 840F D101 850101 870402030306 8902 C100

Get Response Example - Email Format

Example (Hex)

AA0081048255D10182040000000084820010D1018501018704020303068903C10100

Set Request Example - Email Format

Example (Hex)

AA0081048255D11182040000000084820010D1118501018704020303068903C10101

General Information Format - Property 1.2.3.3.7.1

Property Description

111111111111111111111111111111111111111111111111111111111111111

Property OID

1.2.3.3.7.1 / 0x010203030701

Name

General Information Format

Description

This property is used to determine if the General Information should be displayed on the screen or hidden. The default hidden character is ‘*’. The maximum number of characters for General Information is 18.

Byte 0 – Hide digits with ‘*’ (T/F) 0 – 1 (value range 0x00 – 0x01)

Securing Key

None

Min. Len (b)

1

Max. Len (b)

1

Data Type

Binary

Valid Values

Example valid HEX value for the USA 00 Show Digits, 01 Hide Digits

Default

00

Get Request Example - General Information Format

Example (Hex)

AA00 81040155D101 840F D101 850101 870402030307 8902 C100

Get Response Example - General Information Format

Example (Hex)

AA0081048255D10182040000000084820010D1018501018704020303078903C10100

Set Request Example - General Information Format

Example (Hex)

AA00 81040155D111 8410 D111 850101 870402030307 8903 C101 01

Set Response Example (enable) - General Information Format

Example (Hex)

AA0081048255D11182040000000084820010D1118501018704020303078903C10101

Last updated