1.2.nnnn - Device Settings

Device Settings

These sections of the DynaFamily Programmer's Manual details information on sending masked/tracking data..

Applies to: All Dyna Family products

Settings in this group

Setting

Information

Configure how the device runs financial transactions — EMV terminal and kernel parameters, supported entry methods, and amount, currency, and timeout handling.

1.2.1.nnn - Transaction Settings B

Continues the transaction group with the remaining financial/EMV properties, such as contactless and additional processing options.

1.2.2.1.nn - Basic Properties

Read the device's core identity and status: model name, serial number, firmware and boot versions, real-time clock, and operational state. These are mostly read-only values for identifying and health-checking the reader.

1.2.2.1.nn - WLAN Settings (WLAN Only) - A

Configure Wi-Fi connectivity on WLAN-equipped models, including network SSID, security mode, and credentials. Applies only to devices with a WLAN radio.

1.2.2.1.nn - WLAN Settings (WLAN Only) - B

Continues WLAN configuration with the remaining network properties, such as IP addressing and connection behavior.

1.2.2.2.nn - USB Settings (USB Only)

Configure the USB interface on USB-connected devices, including communication mode and power behavior during USB suspend. Applies only when connected over USB.

1.2.3.nnn - User Interface Settings - A

Configure the device's cardholder-facing interface — display behavior, LEDs, buzzer, and prompts — including the UI configuration file.

1.2.3.nnn - User Interface Settings - B

Continues UI configuration with the remaining interface properties, such as the card-logos page and related on-screen elements.

1.2.2.3.1.1 - Bluetooth LE Device Name

Set or read the name the device advertises over Bluetooth LE, used to identify the reader when pairing and connecting.

1.2.5.nnn - Security Settings

Configure the device's security posture, including SRED/encryption behavior and key status.

1.2.7.nnn - System Settings

Configure the device's system settings